1. FUEL (ENGINE ROOM SIDE) PUMP ASSEMBLY OPERATION
Check fuel pressure.
Select the Data List item: Fuel Pressure (High).
| Active Test Display |
|---|
| Control the Target Fuel Pressure Offset |
| Data List Display |
|---|
| Fuel Pressure (High) |
Check that the fuel pressure fluctuates when the target fuel pressure changes.
The target fuel pressure operation decreases the target fuel pressure by -12.5% or increases the target fuel pressure by 24.8%.
If the result is not as specified, replace the fuel (engine room side) pump assembly or fuel delivery pipe.
Check operating sound.
Remove the V-bank cover sub-assembly.
Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>IGNITION COIL AND SPARK PLUG>REMOVAL
Start the engine.
Using a sound scope, check the operating sound of the fuel (engine room side) pump assembly.
If no sound can be heard, check the fuel (engine room side) pump assembly, wire harness and ECM.
Stop the engine.
Install the V-bank cover sub-assembly.