Home › Vehicle Interior › HEATING / AIR CONDITIONING › HEATER WATER PUMP
RM38G0E _58 Vehicle Interior _100766 HEATING / AIR CONDITIONING _0467938 HEATER WATER PUMP G

HEATING / AIR CONDITIONING  HEATER WATER PUMP  INSPECTION  


PROCEDURE

Hide 87200D 1.INSPECT HEATER ACCESSORY ASSEMBLY

a.
E249841C25
1.448,0.25 1.844,0.542 0.396,0.292 1.208,1.625 1.469,1.177 true 2.042,1.615 1.802,1.177 true 0.26,0.177 0.479,0.438 0.219,0.26 10 false *a 1.521,0.323 1.979,0.521 0.458,0.198 10 false B23 2.052,1.604 2.208,1.802 0.156,0.198 10 false - 1.146,1.635 1.385,1.854 0.24,0.219 10 false +B
*a Component without harness connected
(Heater Accessory Assembly)


Apply battery voltage to the heater accessory assembly connector and check the operation of the heater accessory assembly.

OK:
Tester Connection Specified Condition

Click Location & Routing(B23)Location & Routing

Click Connector(B23)Engine Compartment>Engine Room Main Wire / Lamp Wire / No. 2 Engine Room Wire / No. 2 Lamp Wire / No. 3 Engine Room Wire / No. 6 Engine Room Wire / Washer Wiring Assembly>Electric Water Pump Assembly

B23-2 (+B) - battery positive (+)
B23-1 (-) - battery negative (-)
Operates without abnormal sound


NOTICE:
·

Perform the check with no water present.

·

Perform the operation check 3 seconds.



HINT:

If the result is not as specified, there may be a malfunction in the heater accessory assembly.