Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM
RM38G0E _56 Audio / Visual / Telematics _100728 PARK ASSIST / MONITORING _0469670 TOYOTA PARKING ASSIST-SENSOR SYSTEM C

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  U010087  Lost Communication with ECM/PCM "A" Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U014087  Lost Communication with Body Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  


DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the clearance warning ECU assembly.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.


DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U010087 Lost Communication with ECM/PCM "A" Missing Message The clearance warning ECU assembly is unable to receive data from the ECM for 5.12 seconds or more CAN communication system Clearance Warning B
U012687 Lost Communication with Steering Angle Sensor Module Missing Message The clearance warning ECU assembly is unable to receive data from the steering sensor for 5.04 seconds or more CAN communication system Clearance Warning B
U012987 Lost Communication with Brake System Control Module Missing Message The clearance warning ECU assembly is unable to receive data from the skid control ECU for 5 seconds or more CAN communication system Clearance Warning B
U014087 Lost Communication with Body Control Module Missing Message The clearance warning ECU assembly is unable to receive data from the main body ECU (multiplex network body ECU) for 5 seconds or more CAN communication system Clearance Warning B
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message The clearance warning ECU assembly is unable to receive data from the combination meter assembly for 5 seconds or more CAN communication system Clearance Warning B

PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs
50002 438

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438
HINT:
·

After turning the ignition from off to ON, wait 10 seconds or more before checking for DTCs.

·

If CAN communication system DTCs are stored, they may also be stored in other systems.

·

If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.

·

If these DTCs are output frequently, duplicate the conditions that caused the problem symptoms and perform the inspection again, even though DTCs were not output when rechecking for DTCs.




Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

B