Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM
RM38G0E _56 Audio / Visual / Telematics _100728 PARK ASSIST / MONITORING _0469674 BLIND SPOT MONITOR SYSTEM W

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE BLIND SPOT MONITOR SYSTEM


a.

Customizing with the GTS

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



Blind Spot Monitor
Tester Display Description Default Setting ECU
BSM Function Switches the blind spot monitor function on and off. Valid $00:Valid,$01:Invalid Blind Spot Monitor Sensor LH (B)
RCTA Function Switches the RCTA function on and off. Valid $00:Valid,$01:Invalid Blind Spot Monitor Sensor LH (B)
FHL Function Switches the automatic rear flashing hazard lights function on and off. Valid $00:Valid,$01:Invalid Blind Spot Monitor Sensor LH (B)
50006 102

b.

Customizing with the multi-information display

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



BSM
Display Description Default Setting ECU
Brightness Sets the brightness of the indicators in the outer rear view mirror assemblies. Bright Dim or Bright Blind Spot Monitor Sensor LH (B)
Sensitivity Sets the notification timing for vehicles approaching from behind the vehicle. Middle Early, Middle, Late or Only Blind Spot Blind Spot Monitor Sensor LH (B)

RCTA
Display Measurement Item Default Setting ECU
Volume Sets the volume of the RCTA buzzer (No. 2 clearance warning buzzer). 2 1, 2 or 3 Blind Spot Monitor Sensor RH (A)