DESCRIPTION
Blind spot monitor data and Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions and to perform repairs.
CHECK DLC3
Check the DLC3.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>GENERAL INFORMATION
DIAGNOSIS FUNCTION
The blind spot monitor system displays an error message on the multi-information display to inform the driver that the system is unavailable either temporarily or due to a malfunction.
When the system is unavailable temporarily:
Multi-information display displays "Blind Spot Monitor Unavailable See Owner's Manual".
When the system is unavailable due to a malfunction:
Multi-information display displays "Blind Spot Monitor System Malfunction Visit Your Dealer".
The RCTA function displays an error message on the multi-information display to inform the driver that the system is unavailable either temporarily or due to a malfunction.
When the system is unavailable temporarily:
Multi-information display displays "Rear Cross Traffic Alert Unavailable See Owner's Manual".
When the system is unavailable due to a malfunction:
Multi-information display displays "Rear Cross Traffic Alert Malfunction Visit Your Dealer".
The automatic rear flashing hazard lights function displays an error message on the multi-information display to inform the driver that the system is unavailable either temporarily or due to a malfunction.
When the system is unavailable temporarily:
Multi-information display displays "FHL Not Available".
When the system is unavailable due to a malfunction:
Multi-information display displays "FHL Malfunction Visit Your Dealer".