These DTCs are stored if a CAN communication malfunction occurs between the main body ECU (multiplex network body ECU) and other ECUs.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U010087 | Lost Communication With ECM/PCM "A" Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the ECM for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U010187 | Lost Communication with TCM Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the TCM for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U012087 | Lost Communication with Starter / Generator Control Module Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the certification ECU (smart key ECU assembly) for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U012687 | Lost Communication with Steering Angle Sensor Module Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the steering sensor for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U012987 | Lost Communication with Brake System Control Module Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the No. 2 skid control ECU (brake actuator assembly) for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U015187 | Lost Communication with Restraints Control Module Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the airbag ECU assembly for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the combination meter assembly for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U016387 | Lost Communication with Navigation Control Module Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the radio and display receiver assembly for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U016487 | Lost Communication with HVAC Control Module Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the air conditioning amplifier assembly for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U016887 | Lost Communication with Vehicle Security Control Module Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the certification ECU (smart key ECU assembly) for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U019987 | Lost Communication with "Door Control Module A" Missing Message | Communication stop occurs between the main body ECU (multiplex network body ECU) and outer mirror control ECU assembly RH continuously for 10 seconds or more. | CAN communication system | Main Body | B |
| U020087 | Lost Communication with "Door Control Module B" Missing Message | Communication stop occurs between the main body ECU (multiplex network body ECU) and outer mirror control ECU assembly LH continuously for 10 seconds or more. | CAN communication system | Main Body | B |
| U020887 | Lost Communication with "Seat Control Module A" Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the position control ECU assembly for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U023087 | Lost Communication with Rear Gate Module Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the multiplex network door ECU for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U023A87 | Lost Communication with Image Processing Module "A" Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the forward recognition camera for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U110487 | Lost Communication with Cruise Control Module Missing Message | Communication stop occurs between the main body ECU (multiplex network body ECU) and forward recognition camera continuously for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U110687 | Lost Communication with Electric Parking Brake Module Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the No. 2 skid control ECU (brake actuator assembly) for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U111587 | Lost Communication with Tilt & Telescopic Module Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the multiplex tilt and telescopic ECU for approximately 10 seconds or more. | CAN communication system | Main Body | B |
| U111787 | Lost Communication with Accessory Gateway Missing Message | The main body ECU (multiplex network body ECU) does not receive data from the option connector (bus buffer ECU) for approximately 10 seconds or more. | CAN communication system | Main Body | B |
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Pre-procedure1
Turn the ignition switch to ON.
Wait 20 seconds or more.
Procedure1
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| U010187, U012087, U012687, U012987, U015187, U015587, U016387, U016487, U016887, U019987, U020087, U020887, U023087, U023A87, U110487, U110687, U111587 or 111787 is output | B |
Post-procedure1
None
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING