CUSTOMIZE LIGHTING SYSTEM (EXT)
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Customizing with the GTS
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Tail Remind Buzzer Function | Sounds a buzzer when the driver door is opened with the light control switch in the TAIL or HEAD position. | Enable | $00:Disable,$01:Enable | Main Body ECU (Multiplex Network Body ECU) |
| Automatic Light Off Timing Setting | Sets the timing to turn off the taillights when the light control switch is in the TAIL or HEAD position. | Door Open | $00:IG OFF,$01:Door Open | Main Body ECU (Multiplex Network Body ECU) |
| Response Time Adjust | Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position. | Normal | $00:Normal,$01:Long | Main Body ECU (Multiplex Network Body ECU) |
| Daytime Running Light Function | Turns the daytime running light function on/off. | Enable | $00:Disable,$01:Enable | Main Body ECU (Multiplex Network Body ECU) |
| Brightness Level Adjust (Lowering) | Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A | Normal | $00:Normal,$01:Dark2,$02:Dark1,$03:Light1,$04:Light2 | Main Body ECU (Multiplex Network Body ECU) |
| Brightness Level Adjust (Canceling) | Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B | Normal | $00:Normal,$01:Dark2,$02:Dark1,$03:Light1,$04:Light2 | Main Body ECU (Multiplex Network Body ECU) |
| Sensitivity Adjust | Adjusts the sensitivity of the automatic light control system.*C | Normal | $00:Normal,$01:Dark2,$02:Dark1,$03:Light1,$04:Light2 | Main Body ECU (Multiplex Network Body ECU) |
| DRL Function | Turns the DRL function on/off. | Enable | $00:Disable,$01:Enable | Main Body ECU (Multiplex Network Body ECU) |
The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
*A
*B
*C
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Lane Change Flashing Times Adjust | Function to change the lane change flashing times. | 3 | $00:OFF,$01:3,$02:4,$03:5,$04:6,$05:7 | Combination Meter Assembly |
| Proposal Services Function | Turns the suggestion service function on/off. | ON | $00:OFF,$01:Parked,$03:ON | Main body ECU (Multiplex Network Body ECU) |
Customizing with the multi-display
Turn the ignition switch to ON.
Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Lights Settings.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Headlight Auto-on Sensitivity | 0 | Adjusts the sensitivity of the automatic light control system.*A | -2, -1, 0, +1 or +2 | Main Body ECU (Multiplex Network Body ECU) |
| Headlight Auto-off Timer | 30 sec. | Keeps the headlights on for a certain period of time after turning the ignition switch off and closing all of doors with the low beam headlights on. | Off, 30 sec., 60 sec. or 90 sec. | Main Body ECU (Multiplex Network Body ECU) |
| Daytime Running Lights | On | Turns the DRL function on/off. | On or Off | Main Body ECU (Multiplex Network Body ECU) |
The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
*A