12204 1.INSPECT VENTILATION VALVE SUB-ASSEMBLY
Start and idle the engine.
Remove the engine oil level dipstick.
Block the 2 hoses using a hose clipper, etc. as shown in the illustration.
|
Blocking Location | - | - |
If there is a possibility of the surface of the hose becoming damaged when using the tools to create a blockage in the hose, use a cloth to protect the hose before performing work.
Insert the engine oil level dipstick and check for air suction sounds when removing it after 15 seconds or more have elapsed.
Air suction sound can be heard
Remove to the tools used to block to the 2 hoses.
Install the engine oil level dipstick.