Home › Engine / Hybrid System › 1GR-FE (LUBRICATION) › OIL LEVEL SENSOR
RM38G0E _51 Engine / Hybrid System _101208 1GR-FE LUBRICATION _0470789 OIL LEVEL SENSOR G

1GR-FE LUBRICATION  OIL LEVEL SENSOR  INSPECTION  


PROCEDURE

Hide 89491 1.INSPECT ENGINE OIL LEVEL SENSOR

A184466C01
1.75,1.573 2.094,1.792 0.344,0.219 1.833,0.656 2.604,0.417 false 2.604,0.417 2.688,0.417 false 1.938,0.844 2.615,1.052 false 2.615,1.052 2.698,1.052 false 2.74,0.323 3.24,0.521 0.5,0.198 10 false 1 (LVL) 2.979,2.344 3.219,2.542 0.24,0.198 10 false ON 2.979,2.823 3.281,3.021 0.302,0.198 10 false OFF 2.74,0.969 3.094,1.167 0.354,0.198 10 false 2 (E) 0.094,0.052 0.448,0.25 0.354,0.198 10 false *a 1.792,1.604 2.135,1.833 0.344,0.229 10 false C78
*a Component without harness connected
(Engine Oil Level Sensor)


a.

Partially immerse the engine oil level sensor in an oil bath and warm up the oil bath.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(C78)Location & Routing

Click Connector(C78)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>Engine Oil Level Sensor

C78-1 (LVL) - C78-2 (E) ON, 20°C (68°F) Below 1 Ω
OFF, 20°C (68°F) Below 1 Ω
ON, 60°C (140°F) Below 1 Ω
OFF, 60°C (140°F) 10 kΩ or higher


If the result is not as specified, replace the engine oil level sensor.