Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY
RM38G0E _52 Drivetrain _101647 DRIVE SHAFT / PROPELLER SHAFT _0470833 PROPELLER SHAFT ASSEMBLY G

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 37110F 1.INSPECT REAR PROPELLER SHAFT ASSEMBLY

a.
C457917

Using a dial indicator, check the rear propeller shaft assembly runout.

Maximum runout:

0.8 mm (0.0314 in.)


If the rear propeller shaft assembly runout is more than the maximum, replace the rear propeller shaft assembly.


Hide 2.INSPECT SPIDER BEARING

a.

Check the spider bearings for wear or damage.


b.
C457918

Check the axial play of each spider bearing by turning the yoke while holding the shaft tightly.

Maximum bearing axial play:

0.05 mm (0.00196 in.)


If the bearing axial play is more than the maximum, replace the spider bearing.