Home › Drivetrain › AJA0F (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSMISSION SYSTEM (for V35A-FTS)
RM38G0E _52 Drivetrain _100435 AJA0F AUTOMATIC TRANSMISSION / TRANSAXLE _0472752 AUTOMATIC TRANSMISSION SYSTEM U

AJA0F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  TERMINALS OF ECU  


TCM


C457468N01
3.354,0.26 3.802,0.542 0.448,0.281 3.469,0.344 3.927,0.542 0.458,0.198 10 false C36

HINT:

The standard voltage and resistance of each TCM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the TCM terminals.


Terminal No. (Symbol) Terminal Description Condition Specified Condition
C36-1 (+B) - C36-2 (E1) Power source of TCM Ignition switch ON 11 to 14 V
C36-2 (E1) - Body ground Ground Always Below 1 Ω
C36-3 (SL5+) - C36-22 (SL5-) Solenoid (SL5) valve signal 2nd, 3rd, 4th, 5th, 6th, 8th, 9th or 10th gear Pulse generation
C36-4 (SLU+) - C36-23 (SLU-) Solenoid (SLU) valve signal Lock-up ON Pulse generation
C36-5 (SL2+) - C36-24 (SL2-) Solenoid (SL2) valve signal 1st, 3rd, 5th or 10th gear Pulse generation
C36-6 (SL1+) - C36-25 (SL1-) Solenoid (SL1) valve signal 1st, 2nd, 6th, 7th or 9th gear Pulse generation
C36-7 (SL3+) - C36-26 (SL3-) Solenoid (SL3) valve signal 7th, 8th, 9th or 10th gear Pulse generation
C36-8 (SL4+) - C36-27 (SL4-) Solenoid (SL4) valve signal 4th, 5th, 6th, 7th or 8th gear Pulse generation
C36-9 (SL6+) - C36-28 (SL6-) Solenoid (SL6) valve signal 1st, 2nd, 3rd or 4th gear Pulse generation
C36-10 (SLT+) - C36-29 (SLT-) Solenoid (SLT) valve signal Engine idling Pulse generation
C36-11 (NTO) - C36-2 (E1) Transmission Revolution Sensor (NT) signal Engine idling (shift lever in P or N) Pulse generation
C36-12 (SP2B) - C36-2 (E1) Power source for sensor
(specific voltage)
Ignition switch ON 11 to 14 V
C36-14 (L4) - C36-2 (E1) L4 position signal Ignition switch ON and transfer in L4 Below 1 V
Ignition switch ON and transfer not in L4 11 to 14 V
C36-15 (P) - C36-2 (E1) P position switch signal Ignition switch ON and shift lever in P 11 to 14 V
Ignition switch ON and shift lever not in P Below 1 V
C36-16 (N) - C36-2 (E1) N position switch signal Ignition switch ON and shift lever in N 11 to 14 V
Ignition switch ON and shift lever not in N Below 1 V
C36-18 (CAN+) - C36-2 (E1) CAN communication line Ignition switch ON Pulse generation
C36-19 (CAN-) - C36-2 (E1) CAN communication line Ignition switch ON Pulse generation
C36-20 (CANH) - C36-2 (E1) CAN communication line Ignition switch ON Pulse generation
C36-21 (CANL) - C36-2 (E1) CAN communication line Ignition switch ON Pulse generation
C36-30 (NTB) - C36-2 (E1) Power source for sensor
(specific voltage)
Ignition switch ON 11 to 14 V
C36-31 (SP2O) - C36-2 (E1) Transmission revolution sensor (SP2) signal Vehicle being driven Pulse generation
C36-34 (R) - C36-2 (E1) R position switch signal Ignition switch ON and shift lever in R 11 to 14 V
Ignition switch ON and shift lever not in R Below 1 V
C36-35 (D) - C36-2 (E1) D position switch signal Ignition switch ON and shift lever in D, M, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in D, M, "+" or "-" Below 1 V
C36-36 (STP) - C36-2 (E1) Stop light switch signal Brake pedal depressed 11 to 14 V
Brake pedal released Below 1 V
C36-41 (BATT) - C36-2 (E1) Power source of TCM Always 11 to 14 V
C36-42 (IGP) - C36-2 (E1) Ignition switch signal Ignition switch ON 11 to 14 V
C36-44 (SL) - C36-2 (E1) Solenoid (SL) valve signal Lock-up OFF 11 to 14 V
C36-45 (SR) - C36-2 (E1) Solenoid (SR) valve signal Engine running and shift lever in D 11 to 14 V
C36-46 (SC1) - C36-2 (E1) Solenoid (SC1) valve signal 1st, 2nd or 3rd gear 11 to 14 V
C36-48 (PLKC) - C36-2 (E1) Shift lock release signal Ignition switch ON, shift lever in P and brake pedal depressed 10 to 14 V
C36-51 (NTOE) - C36-2 (E1) Misfire detection NT signal Engine running Pulse generation
C36-52 (THO1) - C36-53 (E2) No. 1 ATF temperature sensor signal ATF temperature 115°C (239°F) or higher Below 1.5 V
C36-54 (THOC) - C36-55 (ETH2) No. 2 ATF temperature sensor signal ATF temperature 115°C (239°F) or higher Below 1.5 V


ECM


B460712E28
5.49,0.917 5.823,1.156 0.333,0.24 2.01,0.917 2.344,1.156 0.333,0.24 3.885,0.927 4.219,1.167 0.333,0.24 5.583,0.969 6.042,1.167 0.458,0.198 10 false B1 2.073,0.969 2.531,1.167 0.458,0.198 10 false C37 3.938,0.979 4.396,1.177 0.458,0.198 10 false C38

HINT:

The standard voltage and resistance of each ECM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Terminal Description Condition Specified Condition

*1: w/ 2ND Switch

*2: w/ MTS Switch

C38-10 (+B3) - B1-9 (E1) Power source of ECM Ignition switch ON 11 to 14 V
C38-11 (+B2) - B1-9 (E1) Power source of ECM Ignition switch ON 11 to 14 V
C38-12 (+B) - B1-9 (E1) Power source of ECM Ignition switch ON 11 to 14 V
C38-27 (CAN-) - B1-9 (E1) CAN communication line Ignition switch ON Pulse generation
C38-28 (CAN+) - B1-9 (E1) CAN communication line Ignition switch ON Pulse generation
B1-9 (E1) - Body ground Ground Always Below 1Ω
B1-11 (SFTD) - B1-9 (E1) Down-shift switch signal Ignition switch ON and shift lever in M 11 to 14 V
Ignition switch ON and shift lever held in "-" (down-shift) Below 1 V
B1-12 (SFTU) - B1-9 (E1) Up-shift switch signal Ignition switch ON and shift lever in M 11 to 14 V
Ignition switch ON and shift lever held in "+" (up-shift) Below 1 V
B1-19 (SNWI) - B1-9 (E1) 2ND switch (integration control & panel sub-assembly) signal*1 Ignition switch ON and 2ND switch not pushed 11 to 14 V
Ignition switch ON and 2ND switch pushed Below 1 V
B1-27 (ROTA) - B1-9 (E1) MODE SELECT switch (integration control & panel sub-assembly) signal Ignition switch ON and MODE SELECT switch turned to the right Below 1 V → 11 to 14 V → 11 to 14 V → Below 1 V
(Repeatedly cycles to the above voltage)
B1-28 (DSMS) - B1-9 (E1) DRIVE MODE switch (integration control & panel sub-assembly) signal Ignition switch ON and DRIVE MODE switch not pushed 11 to 14 V
Ignition switch ON and DRIVE MODE switch pushed Below 1 V
B1-29 (ROTB) - B1-9 (E1) MODE SELECT switch (integration control & panel sub-assembly) signal Ignition switch ON and MODE SELECT switch turned to the right Below 1 V → Below 1 V → 11 to 14 V → 11 to 14 V
(Repeatedly cycles to the above voltage)
B1-32 (S) - B1-9 (E1) M shift position switch signal Ignition switch ON and shift lever in M 11 to 14 V
Ignition switch ON and shift lever not in M Below 1 V
B1-46 (MCMS) - B1-9 (E1) MTS switch (integration control & panel sub-assembly) signal*2 Ignition switch ON and MTS switch not pushed 11 to 14 V
Ignition switch ON and MTS switch pushed Below 1 V