41451H 1.INSPECT DIFFERENTIAL LOCK COIL
| *a | Component without harness connected (Differential Lock Coil) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
Click Location & Routing(V11)Location & Routingewd_type=routing;type=c;code=V11 Click Connector(V11)Body>Differential Wire / Frame Wire>Differential Lock Solenoid (Rear Differential Assembly)ewd_type=component;type=c;code=V11;pinno=1,2 |
||
| V11-1 (M2) - V11-2 (M1) | Always | 2.64 to 2.94 Ω |
If the result is not as specified, replace the differential lock coil.