Home › Suspension › FRONT SUSPENSION › FRONT UPPER SUSPENSION ARM
RM38G0E _53 Suspension _102028 FRONT SUSPENSION _0473050 FRONT UPPER SUSPENSION ARM G

FRONT SUSPENSION  FRONT UPPER SUSPENSION ARM  INSPECTION  


PROCEDURE

Hide 48630 1.INSPECT FRONT UPPER SUSPENSION ARM ASSEMBLY LH

C454002

a.

As shown in the illustration, move the ball joint stud back and forth 5 times before installing the nut.


b.

Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the fifth turn.

Turning torque:

0.69 to 4.5 N*m (8 to 46 kgf*cm, 7 to 39 in.*lbf)



c.

Check for any cracks and grease leaks on the ball joint dust cover.