Home › General › MAINTENANCE › JF2BM TRANSFER OIL
RM38G0E _V1 General _100461 MAINTENANCE _0473014 JF2BM TRANSFER OIL A

MAINTENANCE  JF2BM TRANSFER OIL  REPLACEMENT  


PROCEDURE

Hide 51470 1.REMOVE TRANSMISSION UNDER COVER ASSEMBLY (w/ Cover)

a.
C453513

Remove the 2 bolts and transmission under cover assembly.


Hide 36179 2.REMOVE LOWER TRANSFER CASE PROTECTOR

a.
C453515

Remove the 4 bolts and lower transfer case protector.


Hide 3.DRAIN TRANSFER OIL

NOTICE:

Drain the transfer oil 14 minutes or more passed after the vehicle has stopped.

If refill the transfer oil with insufficient transfer oil draining, the transfer oil is excess and causes trouble.


a.
C453516

Remove the filler plug and gasket.


b.
C453517

Remove the drain plug and gasket, and drain the transfer oil.


Hide 4.ADD TRANSFER OIL

a.
C453517

Install a new gasket onto the drain plug and then install the drain plug.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


b.

Add transfer oil.

Oil Grade:

Toyota Genuine Transfer Gear Oil LF or Equivalent


Viscosity:

SAE 75W


Standard Capacity:

1.70 to 1.86 liters (1.80 to 1.96 US qts, 1.50 to 1.63 Imp. qts)


NOTICE:

Add transfer oil slowly.



c.
C282090C04
2.646,0.875 2.958,1.031 0.313,0.156 10 false *a
*a 0 to 5 mm (0 to 0.196 in.)


Check that the transfer oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.

NOTICE:
·

Too much or too little transfer oil will lead to transfer problems.

·

After driving, check the transfer oil level again.




d.
C453516

Install a new gasket onto the filler plug and then install the filler plug.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


e.

Inspect for transfer oil leak.


Hide 36179 5.INSTALL LOWER TRANSFER CASE PROTECTOR

a.

Install the lower transfer case protector with the 4 bolts.

Torque:
13.6 N*m (139 kgf*cm, 10 ft.*lbf)


Hide 51470 6.INSTALL TRANSMISSION UNDER COVER ASSEMBLY (w/ Cover)

a.

Install the transmission under cover assembly with the 2 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)