Home › Power Source / Network › 1GR-FE (BATTERY / CHARGING) › CHARGING SYSTEM
RM38G0E _57 Power Source / Network _101114 1GR-FE BATTERY / CHARGING _0469187 CHARGING SYSTEM D

1GR-FE BATTERY / CHARGING  CHARGING SYSTEM  VEHICLE CONTROL HISTORY (RoB)  


CHECK VEHICLE CONTROL HISTORY (RoB)


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Utility / Vehicle Control History (RoB).

Powertrain > Engine > Utility
Tester Display
Vehicle Control History (RoB)
50005 372 55
Vehicle Control History (RoB) Item
Code Tester Display Measurement Item Diagnostic Note
X0606 Auxiliary Battery Voltage Low during Running History of drop in the battery voltage while vehicle being driven -
X0607 Auxiliary Battery Voltage High during Running History of rise in the battery voltage while vehicle being driven -



CLEAR VEHICLE CONTROL HISTORY (RoB)


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Utility / Vehicle Control History (RoB) (Clear).

NOTICE:

By performing this procedure, all stored Vehicle Control History (RoB) items will be cleared.




VEHICLE CONTROL HISTORY (RoB) FREEZE FRAME DATA


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Utility / Vehicle Control History (RoB).

Powertrain > Engine > Utility
Tester Display
Vehicle Control History (RoB)
50005 372 55

e.

Select a vehicle control history item to access the applicable freeze frame data.


f.

Check the freeze frame data recorded with the Vehicle Control History (RoB).

Vehicle Control History (RoB) Data
GTS Display Description
Total Distance Traveled Driving distance
Total Distance Traveled - Unit Unit of driving distance
BATT Voltage Battery voltage
Alternator Voltage - Non Active Test Requested voltage when the regulator forced operation is not executed
Alternator Output Duty Ratio LIN terminal output (power generation rate)
Status of Alternator Temperature High High temperature due to heavy load on alternator
Alternator Max Output Accumulated Time during Trip Accumulated time of alternator maximum output (duty: 100%) during single trip
Alternator Output Voltage Voltage generated by alternator
Alternator Speed Speed of alternator
Alternator Temperature Temperature of alternator
Alternator Target Voltage Voltage commanded to alternator
Communication Error with Alternator LIN communication malfunction in alternator