Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM
RM38G0E _51 Engine / Hybrid System _101082 CRUISE CONTROL _0469134 CRUISE CONTROL SYSTEM C

CRUISE CONTROL  CRUISE CONTROL SYSTEM  U010087  Lost Communication with ECM/PCM "A" Missing Message  U012287  Lost Communication with Vehicle Dynamics Control Module Missing Message  U015500  Lost Communication with Instrument Panel Cluster (IPC) Control Module  


DESCRIPTION

The ECM communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U010087 Lost Communication with ECM/PCM "A" Missing Message When the cruise control system is operating, a communication malfunction between the No. 2 skid control ECU (brake actuator assembly) and ECM is detected for approximately 1 second or more. CAN communication system Cruise Control B
U012287 Lost Communication with Vehicle Dynamics Control Module Missing Message When the ignition switch is ON and the cruise control system is operating, a communication malfunction between the No. 2 skid control ECU (brake actuator assembly) and ECM is detected for approximately 3 seconds or more. CAN communication system Cruise Control B
U015500 Lost Communication with Instrument Panel Cluster (IPC) Control Module After approximately 2 seconds have elapsed since turning the ignition switch to ON and with the cruise control system on, data communication is lost from the combination meter assembly to the ECM for approximately 7 seconds or more. CAN communication system Cruise Control B

PROCEDURE

1.CHECK FOR DTCs

Pre-procedure1

a.

Clear the DTCs.

Powertrain > Cruise Control > Clear DTCs
50002 374

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



Procedure1

c.

Check for DTCs.

Powertrain > Cruise Control > Trouble Codes
50001 374
Result:
Result Proceed to
CAN communication system DTC is not output A
CAN communication system DTC is output B



Post-procedure1

d.

None



A

B