48860D 1.DISPOSE OF STABILIZER CONTROL WITH ACCUMULATOR HOUSING ASSEMBLY
Always use a cloth to prevent shards of metal flying about due to the release of pressurized gas.
Always wear safety glasses.
The gas is colorless, odorless and non-poisonous.
| *a | 25 mm (0.984 in.) |
| *b | 50 mm (1.969 in.) |
| *c | 15 mm (0.591 in.) |
Using a hacksaw, make a hole in the area between A and B of the stabilizer control with accumulator housing assembly indicated in the illustration to discharge the inside gas and oil.