85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)
| *a | Component without harness connected (Windshield Wiper Motor Assembly) |
Apply auxiliary battery voltage to the windshield wiper motor assembly and check the LO operation.
| Condition | Specified Condition |
|---|---|
| B28-1 (+1) - Auxiliary battery positive (+) B28-5 (E) - Auxiliary battery negative (-) |
Motor operates at low speed (LO) |
| *a | Component without harness connected (Windshield Wiper Motor Assembly) |
Apply auxiliary battery voltage to the windshield wiper motor assembly and check the HI operation.
| Condition | Specified Condition |
|---|---|
| B28-4 (+2) - Auxiliary battery positive (+) B28-5 (E) - Auxiliary battery negative (-) |
Motor operates at high speed (HI) |
If the result is not as specified, replace the windshield wiper motor assembly.
85110 2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)
| *a | Component without harness connected (Windshield Wiper Motor Assembly) |
Apply auxiliary battery voltage to the windshield wiper motor assembly and check the LO operation.
| Condition | Specified Condition |
|---|---|
| B28-5 (+1) - Auxiliary battery positive (+) B28-4 (E) - Auxiliary battery negative (-) |
Motor operates at low speed (LO) |
| *a | Component without harness connected (Windshield Wiper Motor Assembly) |
Apply auxiliary battery voltage to the windshield wiper motor assembly and check the HI operation.
| Condition | Specified Condition |
|---|---|
| B28-3 (+2) - Auxiliary battery positive (+) B28-4 (E) - Auxiliary battery negative (-) |
Motor operates at high speed (HI) |
If the result is not as specified, replace the windshield wiper motor assembly.