This DTC is stored when a malfunction occurs in the navigation ECU assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| B15AD | Navigation Processor Malfunction | When either condition below is met:
·
A short to ground, short to +B or open occurs in the gyro signal circuit
·
Gyro sensor malfunction |
Navigation ECU assembly | Navigation System | A |
Pre-procedure1
Clear the DTCs.
Procedure1
Recheck for DTCs and check that no DTCs are output.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
Post-procedure1
None
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B