This circuit includes the navigation ECU assembly and radio receiver assembly.
Disconnect the I14 radio receiver assembly connector.
Disconnect the I21 navigation ECU assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(I14,I21)Location & Routingewd_type=routing;type=c,c;code=I14,I21 |
||
| I14-7 (SUP) - I21-21 (SUP) | Always | Below 1 Ω |
| I14-7 (SUP) or I21-21 (SUP) - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG