Home › Engine / Hybrid System › 1GR-FE (EMISSION CONTROL) › AIR PUMP
RM38G0E _51 Engine / Hybrid System _101531 1GR-FE EMISSION CONTROL _0474408 AIR PUMP G

1GR-FE EMISSION CONTROL  AIR PUMP  INSPECTION  


PROCEDURE

Hide 17610C 1.INSPECT AIR PUMP ASSEMBLY (w/ Heater)

a.
A226958C07
1.5,0.083 1.917,0.333 0.417,0.25 2.448,0.552 2.323,0.552 2.323,0.552 2,0.781 true 2.458,1.656 2.354,1.656 2.354,1.656 2.021,1.5 true 0.083,0.031 0.271,0.208 0.188,0.177 10 false *a 2.49,0.479 2.906,0.646 0.417,0.167 10 false APH+ 2.49,1.573 2.948,1.74 0.458,0.167 10 false APHG 1.573,0.125 2.031,0.323 0.458,0.198 10 false C93
*a Component without harness connected
(Air Pump Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(C93)Location & Routing

Click Connector(C93)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>Air Pump Assembly

C93-1 (APH+) - C93-3 (APHG) -20°C (-4°F) 3.6 to 17.6 Ω
-10°C (14°F) 3.4 to 16.5 Ω
0°C (32°F) 3.1 to 15.4 Ω
10°C (50°F) 2.8 to 14.3 Ω
20°C (68°F) 2.7 to 13.2 Ω


If the result is not as specified, replace the air pump assembly.