Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM (for Start Function)
RM38G0E _58 Vehicle Interior _100610 THEFT DETERRENT / KEYLESS ENTRY _0467507 ENTRY AND START SYSTEM(for Start Function) M

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM(for Start Function)  REGISTRATION  


PROCEDURE

Hide 1. ADD/REGISTER FINGERPRINTS (w/ Fingerprint Authentication)

a.

To register fingerprint information to a vehicle for the first time

Procedure Steps
1. Select fingerprint registration
1.

Turn the ignition switch to ON.

2.

Select "Fingerprint" from the multi-information display screen.

3.

Select "Register" from the multi-information display screen.


2. Select registration mode
1.

Select "Add" from the multi-information display screen.


3. Select driver
1.

Select "Driver 1" from the multi-information display screen.


4. Select fingerprint number
1.

Select either "Finger1" or "Finger2" from the multi-information display screen.


5. Confirm agreement
1.

Select "Agree" from the multi-information display screen.


6. Register fingerprint information
1.

Repeatedly touch the finger you want to register on the fingerprint sensor.

HINT:
·

Remove your finger from the fingerprint sensor when the meter buzzer sounds (a short beep).

·

Slide your finger around while touching the fingerprint sensor to widen the area from which fingerprint information is obtained.

·

The fingerprint sensor will need to be touched multiple times to obtain fingerprint information over a wide area.

·

Fingerprint registration progress is displayed on the multi-information display screen.




7. Complete registering fingerprint
1.

Check that "Added" is displayed on the multi-information display screen.




b.

To register information for subsequent fingerprints

Procedure Steps
1. Select fingerprint registration
1.

Turn the ignition switch to ON.

2.

Select "Fingerprint" from the multi-information display screen.

3.

Select "Register" from the multi-information display screen.

HINT:

If "Register" cannot be selected, have a user that has registered their fingerprint information with the vehicle touch the fingerprint sensor.



2. Select registration mode
1.

Select "Add" from the multi-information display screen.


3. Select driver
1.

Select the driver or guest from the multi-information display screen.


4. Select fingerprint number
1.

Select either "Finger1", "Finger2", "Finger3" or "Finger4" from the multi-information display screen.

HINT:

"Finger3" and "Finger4" are displayed only when "Guest" is selected in the driver selection.



5. Confirm agreement
1.

Select "Agree" from the multi-information display screen.


6. Register fingerprint information
1.

Repeatedly touch the finger you want to register on the fingerprint sensor.

HINT:
·

Remove your finger from the fingerprint sensor when the meter buzzer sounds (a short beep).

·

Slide your finger around while touching the fingerprint sensor to widen the area from which fingerprint information is obtained.

·

The fingerprint sensor will need to be touched multiple times to obtain fingerprint information over a wide area.

·

Fingerprint registration progress is displayed on the multi-information display screen.




7. Complete registering fingerprint
1.

Check that "Added" is displayed on the multi-information display screen.




Hide 2. CLEAR FINGERPRINT (w/ Fingerprint Authentication)

a.

When using the multi-information display to clear fingerprints

Procedure Steps
1. Select fingerprint registration
1.

Turn the ignition switch to ON.

2.

Select "Fingerprint" from the multi-information display screen.

3.

Select "Register" from the multi-information display screen.

HINT:

If "Register" cannot be selected, have a user that has registered their fingerprint information with the vehicle touch the fingerprint sensor.



2. Select registration mode
1.

Select "Delete" from the multi-information display screen.


3. Select driver
1.

Select the driver or guest to clear from the multi-information display screen.


4. Select fingerprint number
1.

Select either "Finger1", "Finger2", "Finger3" or "Finger4" from the multi-information display screen.

HINT:

"Finger3" and "Finger4" are displayed only when "Guest" is selected in the driver selection.



5. Confirm agreement
1.

Select "Yes" from the multi-information display screen.


6. Complete clearing fingerprint
1.

Check that "Cleared" is displayed on the multi-information display screen.




b.

When using the GTS to clear fingerprints

Procedure Steps
1. Start of clear fingerprints
1.

Turn the ignition switch to ON.

2.

Turn the GTS on.

3.

Enter the following menus: Body Electrical / Entry&Start / Utility / Fingerprint Authentication Mode


2. Get Pass-Code
1.

According to the display on the GTS, obtain the Pass-Code using online authentication or proxy authentication.

NOTICE:

After obtaining the Pass-Code, do not turn off the GTS until registration is completed. If the GTS is turned off before registration is completed, obtain the Pass-Code once more.



3. Check registered electrical key
1.

Touch the registered electrical key transmitter sub-assembly (electrical key) against the engine switch.


4. Select registration mode
1.

Select "Fingerprint" from the multi-information display screen.

2.

Select "Register" from the multi-information display screen.

3.

Select "Delete" from the multi-information display screen.


5. Select driver
1.

Select the driver or guest to clear from the multi-information display screen.


6. Select fingerprint number
1.

Select either "Finger1", "Finger2", "Finger3" or "Finger4" from the multi-information display screen.

HINT:

"Finger3" and "Finger4" are displayed only when "Guest" is selected in the driver selection.



7. Confirm agreement
1.

Select "Yes" from the multi-information display screen.


8. Complete clearing fingerprint
1.

Check that "Cleared" is displayed on the multi-information display screen.




Hide 3. CLEAR ALL FINGERPRINTS (w/ Fingerprint Authentication)

a.

When using the multi-information display to clear all fingerprints

Procedure Steps
1. Select fingerprint registration
1.

Turn the ignition switch to ON.

2.

Select "Fingerprint" from the multi-information display screen.

3.

Select "Register" from the multi-information display screen.

HINT:

If "Register" cannot be selected, have a user that has registered their fingerprint information with the vehicle touch the fingerprint sensor.



2. Check user that registered their fingerprint
1.

Have the user that registered fingerprint information with the vehicle touch the fingerprint sensor.


3. Select registration mode
1.

Select "Delete ALL" from the multi-information display screen.


4. Confirm agreement
1.

Select "Yes" from the multi-information display screen.


5. Complete clearing all fingerprints
1.

Check that "All cleared" is displayed on the multi-information display screen.




b.

When using the GTS to clear all fingerprints

Procedure Steps
1. Start of clear all fingerprints
1.

Turn the ignition switch to ON.

2.

Turn the GTS on.

3.

Enter the following menus: Body Electrical / Entry&Start / Utility / Fingerprint Code Reset


2. Get Pass-Code
1.

According to the display on the GTS, obtain the Pass-Code using online authentication or proxy authentication.

NOTICE:

After obtaining the Pass-Code, do not turn off the GTS until registration is completed. If the GTS is turned off before registration is completed, obtain the Pass-Code once more.



3. Check registered electrical key
1.

Touch the registered electrical key transmitter sub-assembly (electrical key) against the engine switch.


4. Clear all fingerprints
1.

Perform operations according to prompts on the GTS screen.


5. Complete clearing all fingerprints
1.

Finish clear all fingerprints.