| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Camshaft timing gear assembly x Camshaft | 100 | 1020 | 74 | ||||
| Camshaft timing exhaust gear assembly x Camshaft | 100 | 1020 | 74 | ||||
| No. 3 chain tensioner assembly x Camshaft housing LH | 21 | 214 | 15 | ||||
| Camshaft bearing cap (for Bank 2) x Cylinder head LH | for bolt A | 28 | 286 | 21 | |||
| for bolt B | 16 | 163 | 12 | ||||
| No. 2 chain tensioner assembly x Camshaft housing RH | 21 | 214 | 15 | ||||
| Camshaft bearing cap (for Bank 1) x Cylinder head sub-assembly | for bolt A | 28 | 286 | 21 | |||
| for bolt B | 16 | 163 | 12 | ||||
| No. 1 chain tensioner assembly x Cylinder head sub-assembly | 10 | 102 | 7 | ||||
| Timing chain cover plate x Timing chain cover sub-assembly | 9.1 | 93 | 81 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Cylinder head sub-assembly x Cylinder block | 1st | 36 | 367 | 27 | |||
| 2nd | Turn 90° | ||||||
| 3rd | Turn 90° | ||||||
| Cylinder head LH x Cylinder block (for cylinder head set bolt) | 1st | 36 | 367 | 27 | |||
| 2nd | Turn 90° | ||||||
| 3rd | Turn 90° | ||||||
| Cylinder head LH x Cylinder block (except cylinder head set bolt) | 30 | 306 | 22 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Drive plate and ring gear sub-assembly x Crankshaft | 83 | 846 | 61 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Engine hanger x Cylinder head | 33 | 337 | 24 | ||||
| Front engine mounting insulator RH x Vehicle, Front No. 2 flexible hose bracket RH | for bolt A | 124 | 1264 | 91 | |||
| for bolt B | 28 | 286 | 21 | ||||
| Front engine mounting insulator LH x Vehicle, Front No. 2 flexible hose bracket LH | for bolt A | 124 | 1264 | 91 | |||
| for bolt B | 28 | 286 | 21 | ||||
| Front No. 1 engine mounting bracket RH x Cylinder block | 48 | 489 | 35 | ||||
| Front No. 1 engine mounting bracket LH x Cylinder block | 48 | 489 | 35 | ||||
| Front No. 1 engine mounting bracket RH, Front No. 1 engine mounting bracket LH x Front mounting insulator RH, Front mounting insulator LH | 144 | 1468 | 106 | ||||
| Engine wire (for RH Side) x Vehicle | for bolt | 20 | 204 | 15 | |||
| for nut A | 10 | 102 | 7 | ||||
| for nut B | 8.0 | 82 | 71 | ||||
| Engine wire (for LH Side) x Vehicle | 10 | 102 | 7 | ||||
| Front cross member x Vehicle | 88 | 897 | 65 | ||||
| Upper radiator support sub-assembly x Vehicle | 88 | 897 | 65 | ||||
| Hood lock support brace sub-assembly x Upper radiator support sub-assembly and Front cross member | 12.5 | 127 | 9 | ||||
| Air conditioning tube and accessory assembly and No. 2 air conditioning tube and accessory assembly x Upper radiator support sub-assembly | 9.8 | 100 | 87 | ||||
| Cooler liquid pipe A x Air conditioning tube and accessory assembly and No. 2 air conditioning tube and accessory assembly | 9.8 | 100 | 87 | ||||
| Hood sub-assembly x Hood support assembly, Vehicle | for bolt A | 17.5 | 178 | 13 | |||
| for bolt B | 13 | 133 | 10 | ||||
| No. 2 engine under cover assembly x Vehicle | 29 | 296 | 21 | ||||
| No. 1 engine under cover assembly x Vehicle | 29 | 296 | 21 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Stud bolt x No. 1 oil pan sub-assembly | for stud bolt A | 10 | 102 | 7 | |||
| for stud bolt B and C | 4.0 | 41 | 35 | ||||
| Stud bolt x Cylinder head cover sub-assembly LH | 4.0 | 41 | 35 | ||||
| Camshaft bearing cap (for Bank 2) x Camshaft housing sub-assembly LH | 10 | 102 | 7 | ||||
| Camshaft housing sub-assembly LH x Cylinder head LH | 28 | 286 | 21 | ||||
| Camshaft bearing cap (for Bank 2) x Camshaft housing sub-assembly LH | 16 | 163 | 12 | ||||
| No. 3 chain tensioner assembly x Camshaft housing sub-assembly LH | 21 | 214 | 15 | ||||
| Camshaft timing gear assembly, Camshaft timing exhaust gear assembly x No. 3 camshaft sub-assembly, No. 4 camshaft sub-assembly | 100 | 1020 | 74 | ||||
| Camshaft bearing cap (for Bank 1) x Camshaft housing sub-assembly RH | 10 | 102 | 7 | ||||
| Camshaft housing sub-assembly RH x Cylinder head sub-assembly | 28 | 286 | 21 | ||||
| Camshaft bearing cap (for Bank 1) x Camshaft housing sub-assembly RH | 16 | 163 | 12 | ||||
| No. 2 chain tensioner assembly x Camshaft housing sub-assembly RH | 21 | 214 | 15 | ||||
| Camshaft timing gear assembly, Camshaft timing exhaust gear assembly x Camshaft, No. 2 camshaft | 100 | 1020 | 74 | ||||
| No. 1 chain vibration damper x Cylinder head LH, Cylinder block | 22.5 | 229 | 17 | ||||
| No. 1 idle gear shaft x Cylinder block | 60 | 612 | 44 | ||||
| No. 1 chain tensioner assembly x Cylinder head sub-assembly | 10 | 102 | 7 | ||||
| Engine water pump assembly x Timing chain cover sub-assembly | 11 | 112 | 8 | ||||
| Engine rear oil seal retainer x Cylinder block | 10 | 102 | 7 | ||||
| No. 1 oil pan baffle plate x No. 1 oil pan sub-assembly | 10 | 102 | 7 | ||||
| Oil pan drain plug x No. 2 oil pan sub-assembly | 40 | 408 | 30 | ||||
| Rear water by-pass joint x Cylinder head sub-assembly, Cylinder head LH | 10 | 102 | 7 | ||||
| Oil filler cap housing x Cylinder head cover sub-assembly LH | 10 | 102 | 7 | ||||
| Cylinder block water drain cock x Cylinder block | 30 | 306 | 22 | ||||
| Cylinder block water drain cock plug x Cylinder block water drain cock sub-assembly | 12.7 | 130 | 9 | ||||
| Fuel pipe sub-assembly x Cylinder head cover sub-assembly LH | 9.0 | 92 | 80 | ||||
| Heater water hose assembly x Cylinder head cover sub-assembly, Cylinder head LH | 9.8 | 100 | 87 | ||||
| Engine wire x Engine assembly | 10 | 102 | 7 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Union x Cylinder head sub-assembly, cylinder head LH | 14.7 | 150 | 11 | ||||
| Stud bolt x Cylinder head sub-assembly, Cylinder head LH | for bolt A | 10 | 102 | 7 | |||
| for bolt B | 4.0 | 41 | 35 | ||||
| No. 2 straight screw plug x Cylinder head sub-assembly, Cylinder head LH | 80 | 816 | 59 | ||||
| No. 1 straight screw plug x Cylinder head sub-assembly, Cylinder head LH | 44 | 449 | 32 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Stud bolt x Cylinder block | for stud bolt A and B | 10 | 102 | 7 | |||
| for stud bolt C and D | 4.0 | 41 | 35 | ||||
| No. 1 oil nozzle sub-assembly x Cylinder block | 9.0 | 92 | 80 | ||||
| Crankshaft bearing cap x Cylinder block | 1st | 61 | 622 | 45 | |||
| 2nd | Turn 90° | ||||||
| Crankshaft bearing cap x Cylinder block | 25.7 | 262 | 19 | ||||
| Connecting rod cap x Connecting rod | 1st | 24.5 | 250 | 18 | |||
| 2nd | Turn 90° | ||||||