Home › General › SPECIFICATIONS › V35A-FTS BATTERY / CHARGING
RM38G0E _V1 General _100727 SPECIFICATIONS _0478535 V35A-FTS BATTERY / CHARGING F

SPECIFICATIONS  V35A-FTS BATTERY / CHARGING  SERVICE DATA  


CHARGING SYSTEM
Battery Standard specific gravity 1.25 or more at 20°C (68°F)
Standard voltage 12.3 V or higher at 20°C (68°F)
Fuse Standard resistance Below 1 Ω
Charging circuit without load Standard current 10 A or higher
Standard voltage (w/ Stop And Start System) 12.7 to 15.3 V
Standard voltage (w/o Stop And Start System) 13.5 to 14.35 V
Charging circuit with load Standard current 30 A or higher

GENERATOR BRUSH HOLDER ASSEMBLY (for DENSO Made)
Brush length Standard exposed brush length 9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum exposed brush length 4.5 mm (0.177 in.)

GENERATOR BRUSH HOLDER ASSEMBLY (for VALEO Made)
Brush length Standard exposed brush length 10 to 11 mm (0.394 to 0.433 in.)
Minimum exposed brush length 1.9 mm (0.0748 in.)

GENERATOR ROTOR ASSEMBLY (for DENSO Made)
Tester Connection Condition Specified Condition
Slip ring - Slip ring Approx. 20°C (68°F) 1.36 to 1.76 Ω
Slip ring - Rotor Always 10 kΩ or higher

Slip ring diameter Standard diameter 14.2 to 14.8 mm (0.559 to 0.583 in.)
Minimum diameter 14.0 mm (0.551 in.)