RM38G0E _V1 General _100727 SPECIFICATIONS _0478864 V35A-FTS STARTING F
SPECIFICATIONS V35A-FTS STARTING SERVICE DATA
STARTER (w/ Stop And Start System)
| Tester Connection |
Condition |
Specified Condition |
| Battery positive (+) terminal - Terminal 30 - Terminal SL2 |
11.5 V |
130 A or less |
REPAIR SERVICE STARTER KIT (w/ Stop And Start System)
| Tester Connection |
Condition |
Specified Condition |
| Terminal SL1 - Repair service starter kit body |
Always |
Below 1 Ω |
| Terminal SL2 - Repair service starter kit body |
Below 2 Ω |
STARTER ARMATURE ASSEMBLY (w/ Stop And Start System)
| Tester Connection |
Condition |
Specified Condition |
| Segment - Segment |
Always |
Below 1 Ω |
| Segment - Starter armature core |
10 kΩ or higher |
| Commutator for runout |
Maximum Runout |
0.05 mm (0.00197 in.) |
| Commutator diameter |
Standard Diameter |
29 mm (1.14 in.) |
| Minimum Diameter |
28 mm (1.10 in.) |
| Undercut depth |
Standard Undercut Depth |
0.7 mm (0.0276 in.) |
| Minimum Undercut Depth |
0.4 mm (0.0157 in.) |
STARTER BRUSH HOLDER ASSEMBLY (w/ Stop And Start System)
| Brush length |
Standard Length |
14.4 mm (0.567 in.) |
| Minimum Length |
9.0 mm (0.354 in.) |
| Tester Connection |
Condition |
Specified Condition |
A - B C - D D - E |
Always |
Below 1 Ω |
STARTER (w/o Stop And Start System)
| Tester Connection |
Condition |
Specified Condition |
| Battery positive (+) terminal - Terminal 30 - Terminal 50 |
11.0 V |
Below 90 A |
ENGINE SWITCH
| Tester Connection |
Condition |
Specified Condition |
12 (SS1) -3 (GND) 6 (SS2) -3 (GND) 11 (SS3) -3 (GND) |
Not pushed |
10 kΩ or higher |
| Pushed |
Below 1 Ω |
Battery positive (+) -5 (SWIL) Battery negative (-) -3 (GND) |
Illuminates |
RELAY
| Tester Connection |
Condition |
Specified Condition |
| 3 - 5 |
Battery voltage not applied to terminals 1 and 2 |
10 kΩ or higher |
| Battery voltage applied to terminals 1 and 2 |
Below 1 Ω |