RM38G0E _V1 General _100727 SPECIFICATIONS _0478875 BRAKE SYSTEM (OTHER) F
SPECIFICATIONS BRAKE SYSTEM (OTHER) TORQUE SPECIFICATIONS
BRAKE FLUID
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
| Front disc brake bleeder plug |
10.8 |
110 |
8 |
| Rear disc brake bleeder plug |
10.8 |
110 |
8 |
BRAKE PEDAL (for LHD)
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
| Brake pedal support reinforcement x Brake pedal support assembly |
15 |
153 |
11 |
BRAKE PEDAL (for RHD)
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
| Brake pedal support reinforcement x Brake pedal support assembly |
15 |
153 |
11 |
BRAKE BOOSTER (for LHD)
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
in.*lbf |
| Brake booster with master cylinder assembly x Brake pedal support assembly |
14.7 |
150 |
11 |
|
| Brake tube flare nut (12 mm) |
Specified tightening torque |
19.5 |
199 |
14 |
|
| For use with a union nut wrench |
17.4 |
177 |
13 |
|
| No. 1 wire clamp bracket x Brake booster with master cylinder assembly |
6.6 |
67 |
|
58 |
BRAKE BOOSTER (for RHD)
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
in.*lbf |
| Brake booster with master cylinder assembly x Brake pedal support assembly |
14.7 |
150 |
11 |
|
| Brake tube flare nut (12 mm) |
Specified tightening torque |
19.5 |
199 |
14 |
|
| For use with a union nut wrench |
17.4 |
177 |
13 |
|
| No. 1 wire clamp bracket x Brake booster with master cylinder assembly |
6.6 |
67 |
|
58 |
BRAKE BOOSTER PUMP
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
in.*lbf |
| Brake tube flare nut (10 mm) |
without union nut wrench |
15.2 |
155 |
11 |
|
| with union nut wrench |
13.4 |
137 |
10 |
|
| brake booster pump with accumulator assembly x Brake booster with master cylinder assembly |
5.4 |
55 |
|
48 |
| No. 2 wire clamp bracket x Brake booster with master cylinder assembly |
6.6 |
67 |
|
58 |
| No. 2 brake power supply bracket x Brake booster with master cylinder assembly |
6.6 |
67 |
|
58 |
| No. 1 brake power supply bracket x Brake booster with master cylinder assembly |
6.6 |
67 |
|
58 |