Home › General › SPECIFICATIONS › WIPER / WASHER
RM38G0E _V1 General _100727 SPECIFICATIONS _0478876 WIPER / WASHER F

SPECIFICATIONS  WIPER / WASHER  SERVICE DATA  


WINDSHIELD WIPER SWITCH ASSEMBLY (for LHD):
Front Wiper Switch z2-14 (MIST) - z2-5 (E) MIST position Below 1 Ω
Except MIST position 10 kΩ or higher
z2-10 (W-OFF) - z2-5 (E) OFF position Below 1 Ω
Except OFF position 10 kΩ or higher
z2-13 (+S) - z2-5 (E) AUTO position*1 Below 1 Ω
INT position*2
Except AUTO position*1 10 kΩ or higher
Except INT position*2
z2-11 (+1) - z2-5 (E) LO position Below 1 Ω
Except LO position 10 kΩ or higher
z2-12 (+2) - z2-5 (E) HI position Below 1 Ω
Except HI position 10 kΩ or higher
Front Washer Switch z2-15 (WF) - z2-5 (E) ON position Below 1 Ω
OFF position 10 kΩ or higher
Auto Sensitivity Adjustment Switch*1 z2-4 (VR) - z2-5 (E) P1 position 1102 to 1218 Ω
P2 position 570 to 630 Ω
P3 position 256.5 to 283.5 Ω
P4 position Below 1 Ω
Intermittent Time Adjustment Switch*2, *3 z2-4 (VR) - z2-5 (E) P1 position 1102 to 1218 Ω
P2 position 570 to 630 Ω
P3 position 256.5 to 283.5 Ω
P4 position Below 1 Ω
Rear Wiper Switch z2-6 (+1R) - z2-5 (E) ON position Below 1 Ω
z2-7 (C1R) - z2-5 (E) INT position Below 1 Ω
z2-6 (+1R) - z2-7 (C1R) - z2-5 (E) OFF position 10 kΩ or higher
Rear Washer Switch z2-9 (WR) - z2-5 (E) ON position Below 1 Ω
OFF position 10 kΩ or higher


*1: w/ Auto Wiper System

*2: w/o Auto Wiper System

*3: w/ Adjusting Ring


WINDSHIELD WIPER SWITCH ASSEMBLY (for RHD):
Front Wiper Switch z2-11 (MIST) - z2-4 (E) MIST position Below 1 Ω
Except MIST position 10 kΩ or higher
z2-15 (W-OFF) - z2-4 (E) OFF position Below 1 Ω
Except OFF position 10 kΩ or higher
z2-12 (+S) - z2-4 (E) AUTO position*1 Below 1 Ω
INT position*2
Except AUTO position*1 10 kΩ or higher
Except INT position*2
z2-14 (+1) - z2-4 (E) LO position Below 1 Ω
Except LO position 10 kΩ or higher
z2-13 (+2) - z2-4 (E) HI position Below 1 Ω
Except HI position 10 kΩ or higher
Front Washer Switch z2-10 (WF) - z2-4 (E) ON position Below 1 Ω
OFF position 10 kΩ or higher
Auto Sensitivity Adjustment Switch*1 z2-5 (VR) - z2-4 (E) P1 position 1102 to 1218 Ω
P2 position 570 to 630 Ω
P3 position 256.5 to 283.5 Ω
P4 position Below 1 Ω
Intermittent Time Adjustment Switch*2, *3 z2-5 (VR) - z2-4 (E) P1 position 1102 to 1218 Ω
P2 position 570 to 630 Ω
P3 position 256.5 to 283.5 Ω
P4 position Below 1 Ω
Rear Wiper Switch z2-3 (+1R) - z2-4 (E) ON position Below 1 Ω
z2-2 (C1R) - z2-4 (E) INT position Below 1 Ω
z2-3 (+1R) - z2-2 (C1R) - z2-4 (E) OFF position 10 kΩ or higher
Rear Washer Switch z2-16 (WR) - z2-4 (E) ON position Below 1 Ω
OFF position 10 kΩ or higher


*1: w/ Auto Wiper System

*2: w/o Auto Wiper System

*3: w/ Adjusting Ring


WASHER NOZZLE SUB-ASSEMBLY (w/ Heater):
B5-1 (E) - B5-2 (B) Always 22 Ω


LEVEL WARNING SWITCH ASSEMBLY:

*: The level warning switch assembly activates when the washer fluid is 600 to 800 cc (36.6 to 48.8 cu.in.) or less according to the vehicle condition (vehicle stability etc.)

Resistance 1 (S) - 2 (E) Fluid volume is 600 to 800 cc (36.6 to 48.8 cu. in.) or more* 10 kΩ or higher
Fluid volume is 600 to 800 cc (36.6 to 48.8 cu. in.) or less* Below 1 Ω