Home › General › SPECIFICATIONS › SUSPENSION CONTROL
RM38G0E _V1 General _100727 SPECIFICATIONS _0480011 SUSPENSION CONTROL F

SPECIFICATIONS  SUSPENSION CONTROL  TORQUE SPECIFICATIONS  


STABILIZER CONTROL VALVE (for Front Side)
Part Tightened N*m kgf*cm ft.*lbf
Stabilizer control valve sub-assembly x Frame 32 326 24
Front stabilizer housing sub-assembly x Frame 32 326 24
Stabilizer control valve sub-assembly x Front stabilizer control tube assembly flare nut without union nut wrench 15.2 155 11
with union nut wrench 14.2 145 10
Front stabilizer housing sub-assembly x Front stabilizer control tube assembly flare nut (10 mm) without union nut wrench 15.2 155 11
with union nut wrench 13.4 137 10
Front stabilizer housing sub-assembly x Front stabilizer control tube assembly flare nut (17 mm) without union nut wrench 44.1 450 33
with union nut wrench 37.8 385 28
Front stabilizer control tube assembly union bolt 47.5 484 35

STABILIZER CONTROL VALVE (for Rear Side)
Part Tightened N*m kgf*cm ft.*lbf
stabilizer control with accumulator housing assembly x Frame 32 326 24
Rear stabilizer control tube assembly flare nut (10 mm) without union nut wrench 15.2 155 11
with union nut wrench 13.4 137 10
Rear stabilizer control tube assembly flare nut (17 mm) without union nut wrench 44.1 450 33
with union nut wrench 37.8 385 28

SUSPENSION CONTROL ECU
Part Tightened N*m kgf*cm ft.*lbf
Absorber control ECU x Vehicle body 12 122 9

STABILIZER CONTROL ECU
Part Tightened N*m kgf*cm ft.*lbf
Stabilizer control ECU x Vehicle body 12 122 9

FRONT ACCELERATION SENSOR
Part Tightened N*m kgf*cm ft.*lbf
Acceleration sensor x Vehicle body 12 122 9