71611H 1.INSPECT REAR NO. 1 SEAT CUSHION PAD RH (OCCUPANT DETECTION SENSOR)
for RH:
| *a | Component without harness connected (Rear No. 1 Seat Cushion Pad RH (occupant detection sensor)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Ocupied | Below 100 Ω |
| 1 - 2 | Not occupied | 1 MΩ or higher |
If the result is not as specified, replace the rear No. 1 seat cushion pad RH (occupant detection sensor).
for Center:
| *a | Component without harness connected (Rear No. 1 Seat Cushion Pad RH (occupant detection sensor)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Ocupied | Below 100 Ω |
| 1 - 2 | Not occupied | 1 MΩ or higher |
If the result is not as specified, replace the rear No. 1 seat cushion pad RH (occupant detection sensor).