Home › Vehicle Interior › HEATING / AIR CONDITIONING › VISCOUS HEATER › from 2021.07
RM38G0E _58 Vehicle Interior _100766 HEATING / AIR CONDITIONING _0484759 VISCOUS HEATER G

HEATING / AIR CONDITIONING  VISCOUS HEATER  INSPECTION  


PROCEDURE

Hide 87120G 1.INSPECT VISCOUS HEATER WITH MAGNET CLUTCH ASSEMBLY

a.

Inspect the viscous heater with magnet clutch assembly.

i.
E377379C04
1.469,0.083 1.896,0.292 0.427,0.208 1.802,0.885 2.385,0.885 true 0.115,0.115 0.427,0.271 0.313,0.156 10 false *a 2.458,0.823 2.906,1.021 0.448,0.198 10 false MG+ 1.521,0.125 2.135,0.323 0.615,0.198 10 false C149
*a Component without harness connected
(Viscous Heater with Magnet Clutch Assembly)


Apply battery voltage to the clutch and check the operation of the clutch.

OK:
Tester Connection Specified Condition

Click Location & Routing(C149)Location & Routing

Click Connector(C149)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>Viscous Heater with Magnet Clutch Assembly

Battery positive (+) → C149-1 (MG+)
Battery negative (-) → Body ground
Magnet clutch is engaged


If the result is not as specified, there may be a malfunction in the viscous heater with magnet clutch assembly.