| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| P168A00 | Injector #1 Internal EEPROM Malfunction | A malfunction is continuously detected in the EEPROM (fuel temperature calibration value) built into the No. 1 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 1 injector assembly | Does not come on | SAE Code: P168A |
| P168A44 | Injector #1 Internal EEPROM Data Memory Failure | A malfunction is continuously detected in the EEPROM (fuel pressure calibration value) built into the No. 1 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 1 injector assembly | Does not come on | SAE Code: P168A |
| P168A46 | Injector #1 Internal EEPROM Calibration / Parameter Memory Failure | A malfunction is continuously detected in the EEPROM (i-ART learning value) built into the No. 1 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 1 injector assembly | Does not come on | SAE Code: P168A |
| P168B00 | Injector #2 Internal EEPROM Malfunction | A malfunction is continuously detected in the EEPROM (fuel temperature calibration value) built into the No. 2 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 2 injector assembly | Does not come on | SAE Code: P168B |
| P168B44 | Injector #2 Internal EEPROM Data Memory Failure | A malfunction is continuously detected in the EEPROM (fuel pressure calibration value) built into the No. 2 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 2 injector assembly | Does not come on | SAE Code: P168B |
| P168B46 | Injector #2 Internal EEPROM Calibration / Parameter Memory Failure | A malfunction is continuously detected in the EEPROM (i-ART learning value) built into the No. 2 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 2 injector assembly | Does not come on | SAE Code: P168B |
| P168C00 | Injector #3 Internal EEPROM Malfunction | A malfunction is continuously detected in the EEPROM (fuel temperature calibration value) built into the No. 3 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 3 injector assembly | Does not come on | SAE Code: P168C |
| P168C44 | Injector #3 Internal EEPROM Data Memory Failure | A malfunction is continuously detected in the EEPROM (fuel pressure calibration value) built into the No. 3 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 3 injector assembly | Does not come on | SAE Code: P168C |
| P168C46 | Injector #3 Internal EEPROM Calibration / Parameter Memory Failure | A malfunction is continuously detected in the EEPROM (i-ART learning value) built into the No. 3 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 3 injector assembly | Does not come on | SAE Code: P168C |
| P168D00 | Injector #4 Internal EEPROM Malfunction | A malfunction is continuously detected in the EEPROM (fuel temperature calibration value) built into the No. 4 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 4 injector assembly | Does not come on | SAE Code: P168D |
| P168D44 | Injector #4 Internal EEPROM Data Memory Failure | A malfunction is continuously detected in the EEPROM (fuel pressure calibration value) built into the No. 4 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 4 injector assembly | Does not come on | SAE Code: P168D |
| P168D46 | Injector #4 Internal EEPROM Calibration / Parameter Memory Failure | A malfunction is continuously detected in the EEPROM (i-ART learning value) built into the No. 4 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 4 injector assembly | Does not come on | SAE Code: P168D |
| P168E00 | Injector #5 Internal EEPROM Malfunction | A malfunction is continuously detected in the EEPROM (fuel temperature calibration value) built into the No. 5 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 5 injector assembly | Does not come on | SAE Code: P168E |
| P168E44 | Injector #5 Internal EEPROM Data Memory Failure | A malfunction is continuously detected in the EEPROM (fuel pressure calibration value) built into the No. 5 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 5 injector assembly | Does not come on | SAE Code: P168E |
| P168E46 | Injector #5 Internal EEPROM Calibration / Parameter Memory Failure | A malfunction is continuously detected in the EEPROM (i-ART learning value) built into the No. 5 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 5 injector assembly | Does not come on | SAE Code: P168E |
| P168F00 | Injector #6 Internal EEPROM Malfunction | A malfunction is continuously detected in the EEPROM (fuel temperature calibration value) built into the No. 6 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 6 injector assembly | Does not come on | SAE Code: P168F |
| P168F44 | Injector #6 Internal EEPROM Data Memory Failure | A malfunction is continuously detected in the EEPROM (fuel pressure calibration value) built into the No. 6 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 6 injector assembly | Does not come on | SAE Code: P168F |
| P168F46 | Injector #6 Internal EEPROM Calibration / Parameter Memory Failure | A malfunction is continuously detected in the EEPROM (i-ART learning value) built into the No. 6 injector assembly for 3 seconds or more. (1 trip detection logic) |
No. 6 injector assembly | Does not come on | SAE Code: P168F |
| DTC No. | DTC Detection Drive Pattern |
|---|---|
| P168A00 P168B00 P168C00 P168D00 P168E00 P168F00 |
Ignition switch ON for 3 minutes or more |
| P168A44 P168B44 P168C44 P168D44 P168E44 P168F44 |
|
| P168A46 P168B46 P168C46 P168D46 P168E46 P168F46 |
Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.
Clear the DTCs.
Turn the ignition switch off and wait for 30 seconds or more.
Turn the ignition switch to ON and wait for 3 minutes or more.
Enter the following menus: Powertrain / Engine / Trouble Codes.
Read the DTCs.
| Result | Proceed to |
|---|---|
| DTC P168A00, P168B00, P168C00, P168D00, P168E00 and/or P168F00 is output | A |
| DTC P168A44, P168B44, P168C44, P168D44, P168E44 and/or P168F44 is output | |
| DTC P168A46, P168B46, P168C46, P168D46, P168E46 and/or P168F46 is output | |
| No DTC is output | B |
A
B
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
Replace the injector assembly of the cylinder relevant to the DTC.
Click hereEngine / Hybrid System>F33A-FTV (FUEL)>FUEL INJECTOR>REMOVAL
Replace the injection pipe sub-assembly that was removed with a new one.
Following the repair manual, temporarily install the injection pipe and after positioning the injector, tighten the injector to the specified torque.
If the installation procedure is not performed correctly, injector assemblies may become out of position, which may cause the injector assemblies to deteriorate, resulting in malfunctions.
If an injector assembly deteriorates and malfunctions, other problems such as knocking, rough idle, etc. may occur.
If an injector assembly becomes out of position, it is possible that the seal between the injector assembly and injection pipe sub-assembly may become incomplete, resulting in a fuel leak.
| Proceed to |
|---|
| NEXT |
NEXT
Bleed the air from the fuel system.
Click hereEngine / Hybrid System>F33A-FTV (FUEL)>FUEL SYSTEM>ON-VEHICLE INSPECTION
| Proceed to |
|---|
| NEXT |
NEXT
Clear the DTCs.
Turn the ignition switch off and wait for 30 seconds or more.
Turn the ignition switch to ON and wait for 3 minutes or more.
Enter the following menus: Powertrain / Engine / Trouble Codes.
Confirm that the DTC is not output again.
| Proceed to |
|---|
| NEXT |
NEXT