SEAT BELT WARNING SYSTEM DESCRIPTION (w/ Buzzer Regulated by Low)
Seat belt warning light operation for driver seat belt:
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the driver seat belt state, vehicle speed, shift lever position and parking brake state.
Seat belt warning light operation for front passenger seat belt:
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with whether the front passenger seat is occupied, the front passenger seat belt state, vehicle speed, shift lever position and parking brake state.
Rear seat belt warning light (w/ Rear Seat Belt Warning):
The rear seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the vehicle speed, rear seat belt state and rear door state.
Front seat belt warning buzzer:
After turning the ignition switch to ON, if the driver seat belt is not fastened within 1.8 seconds, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.
When the vehicle is driven at approximately 20 km/h (12 mph) or more with the front passenger seat occupied and the driver or front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound once.
When 24 seconds have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 90 seconds.
Rear seat belt warning buzzer (w/ Rear Seat Belt Warning):
When the vehicle is driven at approximately 20 km/h (12 mph) or more with a rear seat belt not fastened not fastened, the seat belt warning buzzer in the combination meter assembly will sound once.
When 24 seconds have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 30 seconds.
SEAT BELT WARNING SYSTEM DESCRIPTION (w/o Buzzer Regulated by Low)
Seat belt warning light operation for driver seat belt:
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the driver seat belt state, vehicle speed, shift lever position and parking brake state.
Seat belt warning light operation for front passenger seat belt:
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with whether the front passenger seat is occupied, the front passenger seat belt state, vehicle speed, shift lever position and parking brake state.
Rear seat belt warning light (w/ Rear Seat Belt Warning) (w/ Rear Occupant Detection Sensor):
The rear seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the vehicle speed, rear seat belt state and rear seat occupant state.
Rear seat belt warning light (w/ Rear Seat Belt Warning) (w/o Rear Occupant Detection Sensor):
The rear seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the vehicle speed, rear seat belt state and rear door state.
Seat belt warning buzzer:
When the vehicle is driven at approximately 20 km/h (12 mph) or more with the front passenger seat occupied and the driver or front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 24 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 100 seconds.
Rear seat belt warning (w/ Rear Seat Belt Warning) (w/ Rear Occupant Detection Sensor)
When the vehicle is driven at approximately 20 km/h (12 mph) or more with a rear seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 24 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 100 seconds.
Rear seat belt warning (w/ Rear Seat Belt Warning) (w/o Rear Occupant Detection Sensor)
When the vehicle is driven at approximately 20 km/h (12 mph) or more with a rear seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 60 seconds.
FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
|
*1: w/ Rear Seat Belt Warning *2: w/ Rear No. 2 Seat Belt Warning |
|
| Front seat belt set (for driver side) | Informs the combination meter assembly of the driver seat belt condition (fastened or unfastened). |
| Front seat belt set (for front passenger side) | Informs the power distribution box assembly of the front passenger seat belt condition (fastened or unfastened). |
| Occupant detection sensor (front seat cushion pad (for front passenger seat)) | Informs the power distribution box assembly of the front passenger seat condition (occupied or unoccupied). |
| Combination meter assembly |
·
Illuminates, blinks or turns off the front seat belt warning light.
·
Illuminates, blinks or turns off the rear seat belt warning light.
·
Sounds the front seat belt warning buzzer.
·
Sounds the rear seat belt warning buzzer. |
|
w/ Rear Occupant Detection Sensor:
·
Rear No. 1 seat cushion pad RH (occupant detection sensor)*1
·
Rear No. 1 seat cushion pad LH (occupant detection sensor)*1 |
Informs the main body ECU (multiplex network body ECU) of the rear seat condition (occupied or unoccupied). |
|
w/o Rear Occupant Detection Sensor:
·
Rear door courtesy light switch assembly LH*1
·
Rear door courtesy light switch assembly RH*1 |
Informs the main body ECU (multiplex network body ECU) of the rear door condition (open or closed). |
|
·
Rear No. 1 seat inner belt assembly RH*1
·
Rear center seat lap type belt assembly LH*1
·
Rear No. 1 seat inner belt assembly LH*1 |
Informs the power distribution box assembly of each rear seat belt condition (fastened or unfastened). |
|
·
Rear No. 2 seat inner belt assembly RH*2
·
Rear No. 2 seat inner belt assembly LH*2 |
Informs the combination meter assembly of each rear No. 2 seat belt condition (fastened or unfastened). |
|
w/ Rear Occupant Detection Sensor:
·
Seat cushion cover with pad RH (occupant detection sensor)*2
·
Seat cushion cover with pad LH (occupant detection sensor)*2 |
Informs the combination meter assembly of the rear seat condition (occupied or unoccupied). |
| Main body ECU (multiplex network body ECU) | Sends the parking brake signal, front passenger seat belt condition (fastened or unfastened), front passenger seat condition (occupied or unoccupied), rear seat belt condition (fastened or unfastened)(w/ Rear Seat Belt Warning), rear seat condition (occupied or unoccupied)*1 (w/ Rear Occupant Detection Sensor) and rear door condition (open or closed)*1 (w/o Rear Occupant Detection Sensor) to the combination meter assembly via CAN communication. |
| No. 2 skid control ECU (brake actuator assembly) | Sends the vehicle speed signal to the combination meter assembly via CAN communication. |
| ECM | Sends the shift position signal to the combination meter assembly via CAN communication. |
| Power distribution box assembly | Sends the front passenger seat belt condition, rear seat belt condition (fastened or unfastened) and front passenger seat condition (occupied or unoccupied) to the main body ECU (multiplex network body ECU) via CXPI communication. |