TCM
The standard voltage and resistance of each TCM terminal is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the TCM terminals.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| C36-1 (+B) - C36-2 (E1) | Power source of TCM | Ignition switch ON | 11 to 14 V |
| C36-2 (E1) - Body ground | Ground | Always | Below 1 Ω |
| C36-3 (SL5+) - C36-22 (SL5-) | Solenoid (SL5) valve signal | 2nd, 3rd, 4th, 5th, 6th, 8th, 9th or 10th gear | Pulse generation |
| C36-4 (SLU+) - C36-23 (SLU-) | Solenoid (SLU) valve signal | Lock-up ON | Pulse generation |
| C36-5 (SL2+) - C36-24 (SL2-) | Solenoid (SL2) valve signal | 1st, 3rd, 5th or 10th gear | Pulse generation |
| C36-6 (SL1+) - C36-25 (SL1-) | Solenoid (SL1) valve signal | 1st, 2nd, 6th, 7th or 9th gear | Pulse generation |
| C36-7 (SL3+) - C36-26 (SL3-) | Solenoid (SL3) valve signal | 7th, 8th, 9th or 10th gear | Pulse generation |
| C36-8 (SL4+) - C36-27 (SL4-) | Solenoid (SL4) valve signal | 4th, 5th, 6th, 7th or 8th gear | Pulse generation |
| C36-9 (SL6+) - C36-28 (SL6-) | Solenoid (SL6) valve signal | 1st, 2nd, 3rd or 4th gear | Pulse generation |
| C36-10 (SLT+) - C36-29 (SLT-) | Solenoid (SLT) valve signal | Engine idling | Pulse generation |
| C36-11 (NTO) - C36-2 (E1) | Transmission Revolution Sensor (NT) signal | Engine idling (shift lever in P or N) | Pulse generation |
| C36-12 (SP2B) - C36-2 (E1) | Power source for sensor (specific voltage) |
Ignition switch ON | 11 to 14 V |
| C36-14 (L4) - C36-2 (E1) | L4 position signal | Ignition switch ON and transfer in L4 | Below 1 V |
| Ignition switch ON and transfer not in L4 | 11 to 14 V | ||
| C36-15 (P) - C36-2 (E1) | P position switch signal | Ignition switch ON and shift lever in P | 11 to 14 V |
| Ignition switch ON and shift lever not in P | Below 1 V | ||
| C36-16 (N) - C36-2 (E1) | N position switch signal | Ignition switch ON and shift lever in N | 11 to 14 V |
| Ignition switch ON and shift lever not in N | Below 1 V | ||
| C36-18 (CAN+) - C36-2 (E1) | CAN communication line | Ignition switch ON | Pulse generation |
| C36-19 (CAN-) - C36-2 (E1) | CAN communication line | Ignition switch ON | Pulse generation |
| C36-20 (CANH) - C36-2 (E1) | CAN communication line | Ignition switch ON | Pulse generation |
| C36-21 (CANL) - C36-2 (E1) | CAN communication line | Ignition switch ON | Pulse generation |
| C36-30 (NTB) - C36-2 (E1) | Power source for sensor (specific voltage) |
Ignition switch ON | 11 to 14 V |
| C36-31 (SP2O) - C36-2 (E1) | Transmission revolution sensor (SP2) signal | Vehicle being driven | Pulse generation |
| C36-34 (R) - C36-2 (E1) | R position switch signal | Ignition switch ON and shift lever in R | 11 to 14 V |
| Ignition switch ON and shift lever not in R | Below 1 V | ||
| C36-35 (D) - C36-2 (E1) | D position switch signal | Ignition switch ON and shift lever in D, M, "+" or "-" | 11 to 14 V |
| Ignition switch ON and shift lever not in D, M, "+" or "-" | Below 1 V | ||
| C36-36 (STP) - C36-2 (E1) | Stop light switch signal | Brake pedal depressed | 11 to 14 V |
| Brake pedal released | Below 1 V | ||
| C36-41 (BATT) - C36-2 (E1) | Power source of TCM | Always | 11 to 14 V |
| C36-42 (IGP) - C36-2 (E1) | Ignition switch signal | Ignition switch ON | 11 to 14 V |
| C36-44 (SL) - C36-2 (E1) | Solenoid (SL) valve signal | Lock-up OFF | 11 to 14 V |
| C36-45 (SR) - C36-2 (E1) | Solenoid (SR) valve signal | Engine running and shift lever in D | 11 to 14 V |
| C36-46 (SC1) - C36-2 (E1) | Solenoid (SC1) valve signal | 1st, 2nd or 3rd gear | 11 to 14 V |
| C36-48 (PLKC) - C36-2 (E1) | Shift lock release signal | Ignition switch ON, shift lever in P and brake pedal depressed | 10 to 14 V |
| C36-52 (THO1) - C36-53 (E2) | No. 1 ATF temperature sensor signal | ATF temperature 115°C (239°F) or higher | Below 1.5 V |
| C36-54 (THOC) - C36-55 (ETH2) | No. 2 ATF temperature sensor signal | ATF temperature 115°C (239°F) or higher | Below 1.5 V |
ECM
The standard voltage and resistance of each ECM terminal is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
|
*1: w/ MTS Switch *2: w/ 2ND Switch |
|||
| B70-9 (+B) - B70-10 (E1) | Power source of ECM | Ignition switch ON | 11 to 14 V |
| B70-10 (E1) - Body ground | Ground | Always | Below 1Ω |
| B70-11 (SFTD) - B70-10 (E1) | Down-shift switch signal | Ignition switch ON and shift lever in M | 11 to 14 V |
| Ignition switch ON and shift lever held in "-" (down-shift) | Below 1 V | ||
| B70-12 (SFTU) - B70-10 (E1) | Up-shift switch signal | Ignition switch ON and shift lever in M | 11 to 14 V |
| Ignition switch ON and shift lever held in "+" (up-shift) | Below 1 V | ||
| B70-27 (ROTA) - B70-10 (E1) | MODE SELECT switch (integration control & panel sub-assembly) signal | Ignition switch ON and MODE SELECT switch turned to the right | Below 1 V → 11 to 14 V → 11 to 14 V → Below 1 V (Repeatedly cycles to the above voltage) |
| B70-28 (DSMS) - B70-10 (E1) | DRIVE MODE switch (integration control & panel sub-assembly) signal | Ignition switch ON and DRIVE MODE switch not pushed | 11 to 14 V |
| Ignition switch ON and DRIVE MODE switch pushed | Below 1 V | ||
| B70-29 (ROTB) - B70-10 (E1) | MODE SELECT switch (integration control & panel sub-assembly) signal | Ignition switch ON and MODE SELECT switch turned to the right | Below 1 V → Below 1 V → 11 to 14 V → 11 to 14 V (Repeatedly cycles to the above voltage) |
| B70-32 (S) - B70-10 (E1) | M shift position switch signal | Ignition switch ON and shift lever in M | 11 to 14 V |
| Ignition switch ON and shift lever not in M | Below 1 V | ||
| B70-35 (+B2) - B70-10 (E1) | Power source of ECM | Ignition switch ON | 11 to 14 V |
| C139-17 (CAN+) - B70-10 (E1) | CAN communication line | Ignition switch ON | Pulse generation |
| C139-18 (CAN-) - B70-10 (E1) | CAN communication line | Ignition switch ON | Pulse generation |
| C139-19 (MCMS) - B70-10 (E1) | MTS switch (integration control & panel sub-assembly) signal*1 | Ignition switch ON and MTS switch not pushed | 11 to 14 V |
| Ignition switch ON and MTS switch pushed | Below 1 V | ||
| C139-20 (SNWI) - B70-10 (E1) | 2ND switch (integration control & panel sub-assembly) signal*2 | Ignition switch ON and 2ND switch not pushed | 11 to 14 V |
| Ignition switch ON and 2ND switch pushed | Below 1 V | ||