Home › Drivetrain › AJA0F (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSMISSION SYSTEM (for F33A-FTV) › from 2021.07
RM38G0E _52 Drivetrain _100435 AJA0F AUTOMATIC TRANSMISSION / TRANSAXLE _0488019 AUTOMATIC TRANSMISSION SYSTEM(for F33A-FTV) D

AJA0F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM(for F33A-FTV)  VEHICLE CONTROL HISTORY (RoB)  


CHECK VEHICLE CONTROL HISTORY (AUTOMATIC TRANSMISSION SYSTEM)


HINT:
·

The vehicle control history data (automatic transmission system) stores the history of the reject function and system protection operations.

·

The number of occurrences, date and distance are stored in batches for each item.



a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Transmission / Utility / Vehicle Control History (RoB).

Powertrain > Transmission > Utility
Tester Display
Vehicle Control History (RoB)
50005 373 55
Code Tester Display Measurement Item Diagnostic Note
X0505 Shift Operation during Accelerator & Brake Depress History of attempts to change the shift lever in P with the accelerator and brake pedals depressed when the engine is running Operate the shift lever with only the brake pedal depressed (Do not depress the accelerator pedal).
X0510 Shifted out of P Position without Depressing Brake Pedal History of attempts to change the shift lever in P with the brake pedal not depressed Operate the shift lever while the brake pedal is firmly depressed
X054C Accelerator Depress when Shift P Position during Engine/Ready ON History of the accelerator pedal depressed when the shift lever in P and the engine running -
X0556 Shifted out of P Position during Cranking History of attempts to change the shift lever in P while the engine cranking Perform the shift operation after the engine is started
X0907 Turbine Rotation Speed Fluctuation more than Expected History of the lock-up clutch vibrating greatly judgment during flex lock-up control -
X0908 Large Increase in Engine Speed History of turbine speed becoming temporarily higher than usual after shifting gears -
X0909 Shift Position Reversed During Forward/Backward Movement History of the shift lever being moved while driving at a certain speed or higher and the shift lever in D or R Make sure not to unintentionally touch the shift lever or place objects on it
X090C High A/T Oil Temperature History of the ATF temperature exceeding the threshold and a warning display being shown on the combination meter assembly after starting the engine (Switches to the shift line with the engine speed suppressed until the ATF temperature drops in order to protect the automatic transmission) -
X090E Transmission Control Module Over Temperature History information stored when the ECU internal temperature has become high -
XF01B ECU Security Key Not Registered ECU security key not updated (Click here)



CLEAR VEHICLE CONTROL HISTORY (AUTOMATIC TRANSMISSION SYSTEM)


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Transmission / Utility / Vehicle Control History (RoB) (Clear).

NOTICE:

By performing this procedure, all stored Vehicle Control History items will be cleared.




VEHICLE CONTROL HISTORY FREEZE FRAME DATA (AUTOMATIC TRANSMISSION SYSTEM)


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Transmission / Utility / Vehicle Control History (RoB).


e.

Select a vehicle control history item to access the applicable freeze frame data.


f.

Check the freeze frame Data recorded with the Vehicle Control History.

Vehicle Control History Data
Tester Display Description
Total Distance Traveled Total distance traveled
Total Distance Traveled - Unit Unit for total distance traveled
Acceleration Sensor Correct Value Acceleration sensor calibration value
Accelerator Position for Control Accelerator position for control
Throttle Position for Shift Point Control Throttle position for shift point control
Stop Light SW Brake pedal operation availability
Shift Range Signal Shift range
Turbine Rotation Speed Input shaft speed
Speed (SP2) ECT vehicle speed
A/T Oil Temperature No.1 ATF temperature sensor value
Output Axis Speed Output shaft speed
Current Virtual Gear Position Gear position
Target Gear Position (ECT) Target gear position
Large Increase in Engine Speed Count Sudden increase in engine speed judgment occurrence count
Shift Position Reversed During Forward/Backward Movement Count Shift position reversed while driving occurrence count
High A/T Oil Temperature Count High ATF temperature occurrence count
Turbine Rotation Speed Fluctuation more than Expected Count Judder judgment occurrence count
Solenoid (SC1) Solenoid (SC1) valve status
Solenoid (SR) Solenoid (SR) valve status
Solenoid (SL) Solenoid (SL) valve status
Control Module Internal Temperature ECU internal temperature



VEHICLE CONTROL HISTORY (AIRBAG SYSTEM)


HINT:

A part of the control history can be confirmed using the vehicle control history.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>VEHICLE CONTROL HISTORY