Home › Engine / Hybrid System › F33A-FTV (ENGINE CONTROL) › ECD SYSTEM (w/ DPF) › from 2021.07
RM38G0E _51 Engine / Hybrid System _106329 F33A-FTV ENGINE CONTROL _0484871 ECD SYSTEM(w/ DPF) C

F33A-FTV ENGINE CONTROL  ECD SYSTEM(w/ DPF)  U015500  Lost Communication with Instrument Panel Cluster (IPC) Control Module  


DESCRIPTION

The ECM and combination meter assembly send and receive signals via CAN communication.

If a communication error occurs between the ECM and combination meter assembly stores this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
U015500 Lost Communication with Instrument Panel Cluster (IPC) Control Module There is no communication between the ECM and Combination Meter Assembly.
(1 trip detection logic)
·

ECM

·

Combination Meter Assembly

·

CAN Communication System


Does not come on SAE Code: U0155

CONFIRMATION DRIVING PATTERN

DTC No. DTC Detection Drive Pattern
U015500 Ignition switch ON and wait for 5 seconds or more.

CAUTION / NOTICE / HINT

HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.CHECK DTC OUTPUT (DTC U015500)
a.

According to the display on the GTS, select "Health Check".


b.

Check for currently output system DTCs.


Result:
Result Proceed to
DTC U015500 is not output A
DTC U015500 is output B



A

B