RM38G0E _V1 General _100727 SPECIFICATIONS _0478717 POWER ASSIST SYSTEMS F
SPECIFICATIONS POWER ASSIST SYSTEMS SERVICE DATA
Power Steering Fluid
| Power Steering Fluid |
Automatic transmission Fluid DEXRON II or III or equivalent |
| Maximum fluid level increase |
5.0 mm (0.197 in.) |
| Fluid pressure at idle speed with valve closed (Maximum fluid pressure) |
for 1GR-FE |
10000 to 13200 kPa (102 to 135 kgf/cm2, 1450 to 1914 psi) |
| for V35A-FTS |
for Middle East and Russia |
10000 to 13200 kPa (102 to 135 kgf/cm2, 1450 to 1914 psi) |
| except Middle East and Russia |
10000 to 10700 kPa (102 to 109 kgf/cm2, 1450 to 1552 psi) |
| for F33A-FTV |
10000 to 10700 kPa (102 to 109 kgf/cm2, 1450 to 1552 psi) |
| Fluid pressure at engine speeds of 1000 rpm and 3000 rpm (Standard fluid pressure difference) |
500 kPa (5.10 kgf/cm2, 73 psi) or less |
| Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position (Maximum fluid pressure) |
for 1GR-FE |
10000 to 13200 kPa (102 to 135 kgf/cm2, 1450 to 1914 psi) |
| for V35A-FTS |
for Middle East and Russia |
10000 to 13200 kPa (102 to 135 kgf/cm2, 1450 to 1914 psi) |
| except Middle East and Russia |
10000 to 10700 kPa (102 to 109 kgf/cm2, 1450 to 1552 psi) |
| for F33A-FTV |
10000 to 10700 kPa (102 to 109 kgf/cm2, 1450 to 1552 psi) |
Vane Pump
| Vane pump shaft and vane pump housing oil maximum clearance |
0.07 mm (0.00276 in.) |
| Vane pump rotor groove and vane pump plate maximum clearance |
0.03 mm (0.00118 in.) |
| Vane pump rotating torque |
0.3 N*m (3 kgf*cm, 3 in.*lbf) or less |