Home › Engine / Hybrid System › F33A-FTV (ENGINE MECHANICAL) › CYLINDER HEAD › from 2021.07
RM38G0E _51 Engine / Hybrid System _106330 F33A-FTV ENGINE MECHANICAL _0485593 CYLINDER HEAD A

F33A-FTV ENGINE MECHANICAL  CYLINDER HEAD  REPAIR  


PROCEDURE

Hide 1.REPAIR INTAKE VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.



a.
A498100

Using a 45° cutter, resurface the valve seat so that the valve seat width is more than the specification.


b.
A124255C32
2.615,0.177 3,0.396 0.385,0.219 10 false 75° 2.885,0.396 3.25,0.625 0.365,0.229 10 false 45° 3.063,0.76 3.385,1 0.323,0.24 10 false 30° 2.844,1.76 3.01,1.948 0.167,0.188 10 false *a
*a Standard Width


Using 30° and 75° cutters, correct the intake valve seat so that the intake valve contacts the entire circumference of the seat. The contact should be in the center of the intake valve seat, and the intake valve seat width should be maintained within the specified range around the entire circumference of the intake valve seat.

Standard width:

1.2 to 1.6 mm (0.0472 to 0.0630 in.)



c.

Hand-lap the intake valve and intake valve seat with an abrasive compound.


d.

Check the intake valve seating position.


Hide 2.REPAIR EXHAUST VALVE SEATS

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.



a.
A498101

Using a 45° cutter, resurface the valve seat so that the valve seat width is more than the specification.


b.
A124255C32
2.615,0.177 3,0.396 0.385,0.219 10 false 75° 2.885,0.396 3.25,0.625 0.365,0.229 10 false 45° 3.063,0.76 3.385,1 0.323,0.24 10 false 30° 2.844,1.76 3.01,1.948 0.167,0.188 10 false *a
*a Standard Width


Using 30° and 75° cutters, correct the exhaust valve seat so that the exhaust valve contacts the entire circumference of the seat. The contact should be in the center of the exhaust valve seat, and the exhaust valve seat width should be maintained within the specified range around the entire circumference of the exhaust valve seat.

Standard width:

1.2 to 1.6 mm (0.0472 to 0.0630 in.)



c.

Hand-lap the exhaust valve and exhaust valve seat with an abrasive compound.


d.

Check the exhaust valve seating position.