Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › from 2021.07
RM38G0E _51 Engine / Hybrid System _101082 CRUISE CONTROL _0469134 CRUISE CONTROL SYSTEM U

CRUISE CONTROL  CRUISE CONTROL SYSTEM  TERMINALS OF ECU  


CHECK ECM (for 1GR-FE)


C458640N01
2.229,0.281 2.615,0.542 0.385,0.26 5.427,0.281 5.813,0.542 0.385,0.26 2.302,0.333 2.615,0.542 0.313,0.208 10 false C92 5.542,0.333 5.854,0.542 0.313,0.208 10 false B2

HINT:

The standard voltage between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals are also indicated. The result of checks should be compared with the standard voltage for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbols) Terminal Description Condition Specified Condition
B2-7 (STP) - C92-81 (E1) Stop light switch assembly signal Brake pedal depressed 11 to 14 V
Brake pedal released 0 to 1.5 V
B2-8 (ST1-) - C92-81 (E1) Stop light switch assembly signal Ignition switch ON, brake pedal depressed 0 to 1.5 V
Ignition switch ON, brake pedal released 11 to 14 V


CHECK ECM (for V35A-FTS or F33A-FTV)


B460712C05
3.854,0.531 4.271,0.771 0.417,0.24 1.885,0.927 2.26,1.177 0.375,0.25 1.885,0.521 2.26,0.771 0.375,0.25 3.854,0.917 4.271,1.156 0.417,0.24 5.438,0.542 5.854,0.781 0.417,0.24 5.438,0.917 5.854,1.156 0.417,0.24 5.531,0.958 5.99,1.156 0.458,0.198 10 false B70 1.948,0.573 2.406,0.771 0.458,0.198 10 false C37 3.938,0.563 4.396,0.76 0.458,0.198 10 false C38 1.927,0.979 2.385,1.177 0.458,0.198 10 false C138 3.906,0.958 4.365,1.156 0.458,0.198 10 false C139 5.552,0.583 6.01,0.781 0.458,0.198 10 false B1 4.375,0.573 4.833,0.771 0.458,0.198 10 false *A 2.365,0.969 2.823,1.167 0.458,0.198 10 false *B 2.365,0.563 2.823,0.76 0.458,0.198 10 false *A 5.969,0.583 6.427,0.781 0.458,0.198 10 false *A 4.375,0.948 4.833,1.146 0.458,0.198 10 false *B 5.969,0.969 6.427,1.167 0.458,0.198 10 false *B
*A for V35A-FTS *B for F33A-FTV


HINT:

The standard voltage between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals are also indicated. The result of checks should be compared with the standard voltage for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


for V35A-FTS:
Terminal No. (Symbols) Terminal Description Condition Specified Condition
B1-21 (ST1-) - B1-9 (E1) Stop light switch assembly signal Ignition switch ON, brake pedal depressed 0 to 1.5 V
Ignition switch ON, brake pedal released 11 to 14 V
B1-22 (STP) - B1-9 (E1) Stop light switch assembly signal Brake pedal depressed 11 to 14 V
Brake pedal released 0 to 1.5 V

for F33A-FTV:
Terminal No. (Symbols) Terminal Description Condition Specified Condition
B70-21 (ST1-) - B70-10 (E1) Stop light switch assembly signal Ignition switch ON, brake pedal depressed 0 to 1.5 V
Ignition switch ON, brake pedal released 11 to 14 V
B70-22 (STP) - B70-10 (E1) Stop light switch assembly signal Brake pedal depressed 11 to 14 V
Brake pedal released 0 to 1.5 V