Home › Engine / Hybrid System › F33A-FTV (EMISSION CONTROL) › EGR VALVE › from 2021.07
RM38G0E _51 Engine / Hybrid System _106332 F33A-FTV EMISSION CONTROL _0491912 EGR VALVE G

F33A-FTV EMISSION CONTROL  EGR VALVE  INSPECTION  


PROCEDURE

Hide 25800 1.INSPECT ELECTRIC EGR CONTROL VALVE ASSEMBLY

a.

Visually check the electric EGR control valve assembly for deposits.

NOTICE:
·

When cleaning the electric EGR control valve assembly, make sure the valve is completely closed.

·

Do not forcibly open the valve as it may be damaged or deformed.

·

When cleaning the electric EGR control valve assembly, use a piece of cloth soaked with cleaning solvent. Spraying the solvent directly onto this part or soaking the part in solvent may damage the part.




b.
A493004C02
2.635,3.458 2.49,2.979 2.49,2.979 2.323,2.979 true 2.646,3.896 2.75,4.208 2.75,4.208 2.948,4.208 true 1.104,3.625 0.833,2.906 0.833,2.906 0.625,2.906 true 0.854,4.385 1.167,4.542 0.313,0.156 10 false *c 2.604,4.385 2.917,4.542 0.313,0.156 10 false *d 0.469,2.833 0.781,2.99 0.313,0.156 10 false *a 2.156,2.906 2.469,3.063 0.313,0.156 10 false *b 3,4.135 3.313,4.292 0.313,0.156 10 false *b
*a Seal Ring End
*b Gap
*c CORRECT
*d INCORRECT


Hold the electric EGR control valve assembly up to a light, and then from the side indicated by the arrow in the illustration, visually check that there is no gap between the valve and body.

Standard:

No light passes through (there is no gap between the valve and body).


HINT:

Light passes through the part even if the valve is completely closed as there is an opening in the seal ring of the valve, this is not a problem.


If the result is not as specified, replace the electric EGR control valve assembly.


Hide 25630 2.INSPECT NO. 2 EGR VALVE ASSEMBLY

NOTICE:
·

Do not forcibly open the valve as it may be damaged or deformed.

·

When cleaning the No. 2 EGR valve assembly, use a piece of cloth soaked with cleaning solvent. Spraying the solvent directly onto this part or soaking the part in solvent may damage the part.



Standard:

No excessive carbon deposit and the No. 2 EGR valve is not stuck.


HINT:

If necessary, replace the No. 2 EGR valve assembly.