| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 20°C (68°F) | 37 to 44 Ω |
| 1 - Body ground 2 - Body ground |
20°C (68°F) | 1 MΩ or higher |
| Axial play of turbine shaft | Standard | 0.11 mm (0.00433 in.) | |
| Turbocharger variable nozzle motor | C159-1 (M-) - C159-2 (M+) | Condition 20°C (68°F) | 1 to 100 Ω |
| No. 2 turbocharger variable nozzle motor | C163-1 (M-) - C163-2 (M+) | Condition 20°C (68°F) | 1 to 100 Ω |
| Turbocharger variable nozzle motor | C159-1 (M-) - Body ground C159-2 (M+) - Body ground |
Condition always | 1 MΩ or higher |
| No. 2 turbocharger variable nozzle motor | C163-1 (M-) - Body ground C163-2 (M+) - Body ground |
Condition always | 1 MΩ or higher |
| Air by-pass valve assembly | C160-1 (ABV) - C160-2 (+B) | Condition 20°C (68°F) | 8.6 to 9.6 Ω |
| Compression spring | Minimum free length | Center exhaust pipe side | 43 mm (1.69 in.) |
| Tail exhaust pipe side | 42 mm (1.65 in.) |
| Item | Condition | Specified Condition |
|---|---|---|
| Reserve tank cap (for Intercooler) | Standard pressure (for brand-new cap) |
93 to 123 kPa (1.0 to 1.3 kgf/cm2, 13.5 to 18 psi) |
| Minimum pressure (for used cap) |
79 kPa (0.8 kgf/cm2, 11.4 psi) |