89421C 1.INSPECT DIESEL TURBO PRESSURE SENSOR
| *a | Front view of wire harness connector (to Diesel Turbo Pressure Sensor) |
Check the power source.
Disconnect the diesel turbo pressure sensor connector.
Measure the voltage.
| Tester Connection | Test Condition | Voltage |
|---|---|---|
Click Location & Routing(C112)Location & Routingewd_type=routing;type=c;code=C112 |
||
| C112-3 (VC) - C112-1 (E) | Ignition switch ON | 4.75 to 5.25 V |
Connect the diesel turbo pressure sensor connector.
Clear DTCs.
Check the sensor operation.
Using GTS, read the data list.
| Tester Display |
|---|
| Atmospheric Pressure |
| Intake Manifold Absolute Pressure |
Disconnect the vacuum hose from the diesel turbo pressure sensor.
The Intake Manifold Absolute Pressure is same as the Atmospheric Pressure.
| *a | SST |
| *b | Vacuum Pump |
Apply pressure to the sensor.
The Intake Manifold Absolute Pressure is more than the Atmospheric Pressure.
Apply vacuum to the sensor.
The Intake Manifold Absolute Pressure is less than the Atmospheric Pressure.
If the results are not as specified, replace the diesel turbo pressure sensor.
89421C 2.INSPECT DIESEL TURBO PRESSURE SENSOR (for Secondary Compressor Outlet)
| *a | Front view of wire harness connector (to diesel turbo pressure sensor (for secondary compressor outlet)) |
Check the power source.
Disconnect the diesel turbo pressure sensor (for secondary compressor outlet) connector.
Measure the voltage.
| Tester Connection | Test Condition | Voltage |
|---|---|---|
Click Location & Routing(C113)Location & Routingewd_type=routing;type=c;code=C113 |
||
| C113-3 (VC) - C113-1 (E) | Ignition switch ON | 4.75 to 5.25 V |
Connect the diesel turbo pressure sensor (for secondary compressor outlet) connector.
Clear DTCs.
Check the sensor operation.
Using GTS, read the data list.
| Tester Display |
|---|
| Atmospheric Pressure |
| 2nd Turbocharger/Supercharger Outlet Pressure |
Disconnect the vacuum hose from the diesel turbo pressure sensor (for secondary compressor outlet).
The Intake Manifold Absolute Pressure is same as the Atmospheric Pressure.
| *a | SST |
| *b | Vacuum Pump |
Apply pressure to the sensor.
The Intake Manifold Absolute Pressure is more than the Atmospheric Pressure.
Apply vacuum to the sensor.
The Intake Manifold Absolute Pressure is less than the Atmospheric Pressure.
If the results are not as specified, replace the diesel turbo pressure sensor (for secondary compressor outlet).