89422P 1.INSPECT ENGINE COOLANT TEMPERATURE SENSOR
Partially immerse the engine coolant temperature sensor in water and warm up the water.
Measure the resistance according to the value(s) in the table below.
| *a | Acceptable Range | - | - |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(C129)Location & Routingewd_type=routing;type=c;code=C129 |
||
| C129-1 (E22) - C129-2 (THW2) | 20°C (68°F) | 2.32 to 2.59 kΩ |
| 80°C (176°F) | 0.310 to 0.326 kΩ | |
Do not put your hands in the water warmed up during the inspection.
Touching the hot water may result in burns.
When checking the engine coolant temperature sensor in water, do not allow water to contact the terminals. After completing the check, dry the engine coolant temperature sensor.
If the result is not as specified, replace the engine coolant temperature sensor.