Home › Engine / Hybrid System › F33A-FTV (FUEL) › COMMON RAIL › from 2021.07
RM38G0E _51 Engine / Hybrid System _106331 F33A-FTV FUEL _0493053 COMMON RAIL G

F33A-FTV FUEL  COMMON RAIL  INSPECTION  


PROCEDURE

Hide 23810A 1.INSPECT COMMON RAIL ASSEMBLY

a.

Inspect the pressure discharge valve.

i.
A333796C11
1.438,0.219 1.854,0.448 0.417,0.229 2.813,1 2.042,1 true 1.354,1 0.583,1 true 0.333,0.135 0.646,0.292 0.313,0.156 10 false *a 1.479,0.26 1.875,0.417 0.396,0.156 10 false C169 0.188,0.927 0.625,1.094 0.438,0.167 10 false COM3 2.865,0.906 3.188,1.073 0.323,0.167 10 false RLV
*a Component without harness connected
(Common Rail Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(C169)Location & Routing

Click Connector(C169)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>Pressure Discharge Valve (Common Rail Assembly)

C169-1(RLV) - C169-2(COM3) 20°C (68°F) 0.42 to 0.52 Ω


HINT:

The temperature indicated in "Condition" is the temperature of the pressure discharge valve.



ii.

If the result is not as specified, replace the common rail assembly.