22100 1.INSPECT INJECTION OR SUPPLY PUMP ASSEMBLY
Inspect the pre-stroke control valve assembly.
| *a | Component without harness connected (Injection or Supply Pump Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(C166,C167)Location & Routingewd_type=routing;type=c,c;code=C166,C167 |
||
| C166-1(+B) - C166-2(PCV) | 20°C (68°F) | 0.42 to 0.52 Ω |
| C167-1(+B) - C167-2(PCV2) | 20°C (68°F) | 0.42 to 0.52 Ω |
If the result is not as specified, replace the injection or supply pump assembly.