The ECM and combination meter assembly send and receive signals via CAN communication.
If a communication error occurs between the ECM and combination meter assembly stores this DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| U015500 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | There is no communication between the ECM and Combination Meter Assembly. (1 trip detection logic) |
·
ECM
·
Combination Meter Assembly
·
CAN Communication System |
Does not come on | SAE Code: U0155 |
| DTC No. | DTC Detection Drive Pattern |
|---|---|
| U015500 | Ignition switch ON and wait for 5 seconds or more. |
Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.
According to the display on the GTS, select "Health Check".
Check for currently output system DTCs.
| Result | Proceed to |
|---|---|
| DTC U015500 is not output | A |
| DTC U015500 is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING