Home › General › SPECIFICATIONS › F33A-FTV STARTING › from 2021.07
RM38G0E _V1 General _100727 SPECIFICATIONS _0501433 F33A-FTV STARTING F

SPECIFICATIONS  F33A-FTV STARTING  SERVICE DATA  


GLOW PLUG
Tester Connection Condition Specified Condition
Glow plug terminal - Body ground 20°C (68°F) Approximately 1.0 Ω

STARTER (w/ Stop And Start System)
Tester Connection Condition Specified Condition
Battery positive (+) terminal - Terminal 30 - Terminal 50 11.5 V 130 A or less

STARTER (for 2.0 kW Type)
Tester Connection Condition Specified Condition
Battery positive (+) terminal - Terminal 30 - Terminal 50 11.0 V Below 90 A

STARTER (for 2.7 kW Type)
Tester Connection Condition Specified Condition
Battery positive (+) terminal - Terminal 30 - Terminal 50 11.0 V Below 90 A

ENGINE SWITCH
Tester Connection Condition Specified Condition
12 (SS1) -3 (GND)
6 (SS2) -3 (GND)
11 (SS3) -3 (GND)
Not pushed 10 kΩ or higher
Pushed Below 1 Ω
Battery positive (+) -5 (SWIL)
Battery negative (-) -3 (GND)
Illuminates

RELAY
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω