RM38G0E _V1 General _100727 SPECIFICATIONS _0501432 F33A-FTV BATTERY / CHARGING F
SPECIFICATIONS F33A-FTV BATTERY / CHARGING SERVICE DATA
CHARGING SYSTEM
| Battery |
Standard specific gravity |
1.25 or more at 20°C (68°F) |
| Standard voltage |
12.3 V or higher at 20°C (68°F) |
| Fuse |
Standard resistance |
Below 1 Ω |
| Charging circuit without load |
Standard current |
10 A or higher |
| Standard voltage (w/ Stop And Start System) |
12.7 to 15.3 V |
| Standard voltage (w/o Stop And Start System) |
13.5 to 14.35 V |
| Charging circuit with load |
Standard current |
30 A or higher |
GENERATOR BRUSH HOLDER ASSEMBLY (for DENSO Made)
| Brush length |
Standard exposed brush length |
9.5 to 11.5 mm (0.374 to 0.453 in.) |
| Minimum exposed brush length |
4.5 mm (0.177 in.) |
GENERATOR BRUSH HOLDER ASSEMBLY (for VALEO Made)
| Brush length |
Standard exposed brush length |
10 to 11 mm (0.394 to 0.433 in.) |
| Minimum exposed brush length |
1.9 mm (0.0748 in.) |
GENERATOR ROTOR ASSEMBLY (for DENSO Made)
| Tester Connection |
Condition |
Specified Condition |
| Slip ring - Slip ring |
Approx. 20°C (68°F) |
1.36 to 1.76 Ω |
| Slip ring - Rotor |
Always |
10 kΩ or higher |
| Slip ring diameter |
Standard diameter |
14.2 to 14.8 mm (0.559 to 0.583 in.) |
| Minimum diameter |
14.0 mm (0.551 in.) |