Home › General › SPECIFICATIONS › F33A-FTV EMISSION CONTROL › from 2021.07
RM38G0E _V1 General _100727 SPECIFICATIONS _0502417 F33A-FTV EMISSION CONTROL F

SPECIFICATIONS  F33A-FTV EMISSION CONTROL  SERVICE DATA  


EXHAUST GAS TEMPERATURE SENSOR (for DPF)
Item Tester Connection Sensor Temperature Specified Condition
EXHAUST GAS TEMPERATURE SENSOR 1 (E2) - 2 (THC3) 40 to 60°C (104 to 122°F) 42.1 to 68.4 kΩ
NO. 2 EXHAUST GAS TEMPERATURE SENSOR 1 (E2) - 2 (THCI) 40 to 60°C (104 to 122°F) 42.1 to 68.4 kΩ
NO. 3 EXHAUST GAS TEMPERATURE SENSOR 1 (E2) - 2 (THCO) 40 to 60°C (104 to 122°F) 42.1 to 68.4 kΩ

EXHAUST GAS TEMPERATURE SENSOR (for Urea SCR System)
Tester Connection Sensor Temperature Specified Condition
1 (E2) - 2 (THSO) 40 to 60°C (104 to 122°F) 42.1 to 68.4 kΩ

EXHAUST GAS TEMPERATURE SENSOR (for EGR)
Tester Connection Sensor Temperature Specified Condition
1 (E2) - 2 (THEG) 40 to 60°C (104 to 122°F) 7.90 to 12.1 kΩ

EXHAUST FUEL ADDITION INJECTOR
Tester Connection Condition Specified Condition
1 (FIV) - 2 (+B) 20°C (68°F) 11.6 to 12.4 Ω

DPF SWITCH
Tester Connection Condition Specified Condition
2 (E) - 5 (B) Switch OFF 10 kΩ or higher
2 (E) - 5 (B) Switch ON Below 1 Ω
6 (ILL+) - Battery positive (+)
1 (ILL-) - Battery negative (-)
- Illumination on

UREA INJECTOR
Tester Connection Condition Specified Condition
1 (#1U) - 2 (+B) 20°C (68°F) 11.6 to 12.4 Ω

UREA TANK
Item Specified Condition
Urea solution (AdBlue) capacity (Urea tank + filler pipe) Approximately 17.9 liters (18.9 US qts, 15.8 Imp. qts)