The headlight ECU sub-assembly LH sends automatic headlight beam level control signals to the headlight leveling motor via LIN communication.
The headlight ECU sub-assembly and headlight leveling motor communicate via LIN communication.
The headlight leveling motor operates according to power supplied and automatic headlight beam level control signals from its respective headlight ECU sub-assembly and sends its operating state to the headlight ECU sub-assembly.
The headlight ECU sub-assembly LH stores a DTC if it detects that a headlight leveling motor is malfunctioning.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| B241700 | Leveling Motor LH Malfunction |
Detection condition:
The ignition switch is ON.
Malfunction status:
Headlight leveling motor LH malfunction detected
Malfunction duration:
- |
Headlight leveling motor LH | Headlight Control | A |
| B241800 | Leveling Motor RH Malfunction |
Detection condition:
The ignition switch is ON.
Malfunction status:
Headlight leveling motor RH malfunction detected
Malfunction duration:
- |
Headlight leveling motor RH | Headlight Control | A |
for LHD
for RHD
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Check for DTCs.
| Result | Proceed to |
|---|---|
| B241700 and B241800 are not output | A |
| B241700 is output | B |
| B241800 is output | C |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
C