REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
| *1 | RADIATOR SUPPORT SUB-ASSEMBLY | *2 | RADIATOR SUPPORT TO FRONT FENDER BRACKET |
|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
Measure the dimensions before installing the headlights.
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 1295 mm (50.98 in.) | B | 1033 mm (40.67 in.) |
| C | 1248 mm (49.13 in.) | D | 1212 mm (47.72 in.) |